开云体育

Hi there, I have good success with a diamond X500H this is the HEAVY Duty version of the X500. I know that there is other options out there. But for what it is worth that is my 2 cents. Dave KD4POG

Gary, check the spacing between the dipoles. Measure the spacing, and then calc. the spacing for the frequency that you are using. Dave

Several people have asked for a copy of the bylaws of the Ohio Repeater Council. A copy is now posted at: http://www.wa8dbw.ifip.com/Bylaws.html For those not interested - please excuse

There is not a lot on this tower...but the county law repeater which transmits 80 watts out is on the same tower. But again, I would assume this would have been taken into account. (maybe not) Their

Thanks for the help so far. I understand there are a lot of variables in the operation of the repeater. I have just put one up on 440. Our fire rpt is all new equipment that supposedly has been

if you will get in touch with jan xtal and give them all the information from the data plate and tell th em what your tx and rx frequencies are going to be they will do the calculations for you..

I have been watching some of the email in regards to these antennas, and now I have a question. We have a VHF repeater for our fire depts in our county. Compared to using other ham repeaters on 2m,

Henry Clark wrote:

Well, it may be cheating, but I don't bother. When I order from ICM, I just tell them GE Mastr II, 2C, TX and they take it from there. They know all the calculations. I know Bomar is the same. I

The web page with the information on converting the Master II or MVP is at http://www.condor-connection.org/mods/mods.html de Joe WB6HRO

Date: Thursday, April 15, 1999 5:46 PM Subject: [Repeater-builder] ge master II VHF to 220Mhhz From: KF4TNP <Bug1@...> looking for info on converting a ge master II base to 220Mhz I pretty

unsubscribe

Hello All, I have a simple question (I think), but it may not have a simple answer. Recently I have acquired a GE MASTR II UHF radio for my repeater. I have seen 2 or 3 different ways to calculate

Dan Swee wrote:

Hello Listmembers, Thanks for all of the replies on my Hamtronics equipment I listed for sale yesterday. It has been spoken for!! Thanks & 73, Jeff Weinberg W8CQ w8cq@...

looking for info on converting a ge master II base to 220Mhz

Richard D. Reese wrote:

"Kevin K. Custer W3KKC" wrote: Kevin I want to take a moment and thank you. I am glad that you had the foresight to start a list that welcomed HTML postings. It is refreshing that someone is in

Hi Guys: I may have lucked out yesterday......I got an e-mail from an ex-employee of a local 2-way shop. He heard that I have a 6 meter repeater on the air (he's also a ham), and offered the Sinclair

Has anyone ever successfully interfaced an Icom 2/3/4at to a RC-100 controller? From what I can tell, no FC-1 board or similar is needed. I have both units here, and thought that it would make a