Gary,
check the spacing between the dipoles. Measure the spacing, and then
calc. the spacing for the frequency that you are using.
Dave
toggle quoted message
Show quoted text
-----Original Message-----
From: w7ntf@... [mailto:w7ntf@...]
Sent: Thursday, April 15, 1999 6:18 PM
To: Repeater-builder@...
Subject: [Repeater-builder] Re: Shortening Db-212 style antennas..
From: w7ntf@...
Hi Tedd,
I read your message with interest. I have a similar situation. I was given a
beautiful shiny UHF exposed dipole array with 8 dipoles... four on one side
of the mast and four more 180 degrees out... The problem is that the system
is cut for the low end of the UHF spectrum, in the 420 mhz range. It does
work as is with an acceptable reflected power, however the efficiency is
real
poor. I am wondering if it is possible to shorten things somehow in order to
push the center freq into the FM portion of the UHF ham band? I suspect
that
it is possible to do so, but would proceed with caution, as we may indeed
get
the resonant freq moved up into the ham band by tweaking the physical length
of each element, but do not forget that the phasing harness is not going to
easily be adjusted. That would probably drag the efficiency of the re-tuned
dipoles down some, as well as produce uncontrollable effects on the
radiation
pattern, gain, etc... I would be very pleased to hear what others think.
Good
luck in your quest....
73, de Gary, W7NTF
------------------------------------------------------------------------
Have you visited the new ONElist home page lately?
ONElist: The Leading e-mail list and community service on the Internet!
------------------------------------------------------------------------
This list is sponsored by the owners and users of "RBTIP"
