开云体育

This is a place for temp files, other than administrative files. Either they are to be added to the next release, added to the Documents or will have a short life span. 开云体育 has free subscription storage limit of 1 GB! The following are counted towards the storage limits for the group: - Files - Photos - Images in databases - Images in wiki pages - Message attachments 1. Please put files into the correct folders. - If there is not an appropriate folder, feel free to create one. 2. If you are working on a problem and want to load info for others to look at, create a folder within the 'Problems Being Worked On' folder using the Msg number or you name as the folder name. When the problem is resolved please delete the folder. 3. All files and photos are subject to removal at the moderators discretion. Your Moderators -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most cases, but there are HUGE numbers of possible configurations for DCC systems, and Windows, Linux, and Mac computers out there. Just asking "How do I get it to work" is NOT going to get you any useful help. When asking ANY question, you should >>>utilize a meaningful subject line<<< that indicates the problem and include the following information in the body of the message: + If JMRI has started copy and paste the System Console into the body. (its under help on the start screen) + Has JMRI worked before on this computer? + JMRI version + Previous version if you just upgraded + Java version + Previous version if you just upgraded + Computer make and model + if you have just upgraded, from which version + Any other DCC devices in use + Specific details of your difficulty including error messages if any, or what you would like to do with JMRI. Decoder Programming, Signals, Automation, etc. Depending on the nature of the problem, you may need to supply even more information, but this is the absolute required for anyone to give you accurate answers. Signing you post helps keep the group friendly and personable! Your moderators and trouble shooters.

Please use "meaningful subject lines" when starting topics. We are getting lots of subject lines that don't give much if any idea of what the topic is about. By providing a meaningful subject line you may get the attention of someone that can provide you assistance with your issue. It also give others the chance to skip the topic if it is not of interest to them. -- Peter Ulvestad JMRI Users Group Moderator - https://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

We would like to point out that this list is for discussions related to JMRI, and is intended to be a place that people, particularly beginners, can turn to for help with their JMRI problems from more experienced JMRI users. General DCC and model railroading topics should be taken to a more appropriate forum and NOT be posted here. SPAM of any kind, politics, legal issues, and other off-topic matters should NOT be posted to the list and will be subject to deletion by the moderators, as will any responses to such off-topic matters. New members still on moderated status will find that off-topic posts will not be approved for posting, and old members making such posts may find themselves back on moderated status. BUY / SELL and ADVERTISING is NOT PERMITTED Let's keep things simple for all of us, and keep the discussion here on-topic. Your moderators

I don't know were to begin with my question. But here goes. I have been using decoder pro and operations pro for five years with great results. I do the normal up dates when needed and have never had an issue. Today I started decoder pro and my loco roster did not come up. The program went to starting a new roster page. My roster list is still in my operations pro window. What could I have done to have eliminate decoder pro loco roster? Any help would be appreciated. It is not the end of the world but it sure would be nice to know what I did to keep from ever doing it again. -- Mike Swederska Meramec Valley Lines Modeling Mopac equipment in 3/16

Windows 11 or Linux Mint 21.1 JMRI 5.10 I take my "panel file" home from the museum to work on it locally. I run JMRI on Linux Mint at home. I was working on creating an inline LogixNG whose purpose was to set the value field of a lot of blocks on the layout having been triggered by an icon touch on a Panel Editor panel. That all worked fine at home. I created a few of the add/item/block steps in a conditionalNG. Then I copied the file to a USB drive and ambled down to the museum to complete the task on site. But much to my astonishment and grumpiness the add/item/block window is different at the museum than at home. The rightmost block in that window is missing. This is where one gets to type in the value that is to be applied to the value field of the block. It's the same whether I'm adding a new line or editing an existing one that I had created at home. I don't get it. Why is this different? JMRI version is the same at both locations. George

need help from someone who knows the jmri automation software I opened jmri panel pro and used a layout panel used many times before with versions of jmri before 5.10. Now using 5.10 on a latest windows laptop. Test 1 I have a train in block 1 and block2. The loop is b1-b2-b3-b4-b5-b6-b1. I create train 1 located in b2 which starts up and properly stops in b6 occupying b6 and b5 I create train 2 located in b1 which starts and stops. Both trains are now stopped and each has an allocated block in front of it. Train 1 now has b1 allocated to it and train 2 which occupies b3 and b2 has b4 allocated to it. Neither train moves. I check the loconet monitor and both engine speeds were set to 0. In the past using previous versions of jmri after train 2 leaves b1 and it gets allocated to train 1 then train 1 would immediately start up and run and after b4 is allocated to train 2 it would also run. That’s not happening as both dont move. I need software help to find out why? Test 2. When creating train 1 it goes to b6 and continues on and crashes into train 1 still sitting in b1. The layout panel accurately show the occupied blocks in red and the allocated blocks in yellow. Need help to know why the automation in jmri is no longer functioning. Tony

Gang, my old basement laptop was calling it quits, so a new one has arrived. Before I install JMRI, is there anything I should be aware of? New machine is windows 11 in S mode which I don’t know much about. Does that present any issues? Thanks. Bruce B. Blackwood in Mount Airy, MD

Recently it became necessary to reinstall Java and JMRI. First, I checked that both programs were uninstalled. I then installed Java Version 8 Update 441 and JMRI Version 4.26+R381. Both were problem free installs. I then tried to start JMRI so I could load my roster. The Java icon and the DecoderPro icon appeared in the taskbar and the small JMRI splash screen appeared in the middle of my screen. That's as far as the startup got. I've listed my equipment below. What am I missing? I'd appreciate any help in getting started. -- Richard Richter Dell Lattude 3190 2-in-1 Laptop Computer Microsoft Windows 11 Pro RR-CirKits LocoBuffer-NG Rev-a Digitrax ZephyrXtra DCS 51 Command Station

Test release 5.11.5 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in June 2025. It's really helpful when people download, install and use these test releases so we can find and fix any inadvertent new problems early. If you are currently using JMRI 4.99.10 or earlier, there is an update process that we strongly recommend. See the release note section on updates: <https://www.jmri.org/releasenotes/jmri5.11.5.shtml#update> For more information on the issues, new features and bug fixes in 5.11.5 please see the release note: <https://www.jmri.org/releasenotes/jmri5.11.5.shtml> Note that JMRI is made available under the GNU General Public License. For more information, please see our copyright and licensing page. <https://www.jmri.org/Copyright.html> The download links, along with lots of other information which we hope you'll read, can be found on the release note page: <https://www.jmri.org/releasenotes/jmri5.11.5.shtml> Bob — Bob Jacobsen rgj1927@...

I am trying to program an BLI engine I had upgraded to Paragon4. Sometime I program a section and it work fine and sometime I get 308 errors. Also I program one section and another section changes. Also the smoke unit works when F7 off and goes off when F7 on. I going to reload the DCC+ software but I do not believe that will help since I tried other locomotive and everything works. Any suggestions. Joe

Over the past few weeks we have started running into a long latency issue between the signal mast logic and the turnouts that controls each LED. We are using a Digitrax system with a CMRI network for Signals and Turnouts. Our network consists of about 17 CPNODES at the moment with a few more later to come. We have just over 100 Signal Masts with about 75%~80% of them in working order. In recent weeks as we continue to expand our CMRI network I started noticing an issue where the nodes are polling correctly with zero errors but signal aspects change slower than usual. With times where the change is so long the signals just give impossible aspects at times. Now the interesting part is our turnouts are on the same network as the signals and have no issues even while the issue is present on the signals. Directly changing the outputs using the turnouts table works just fine for changing the individual outputs, but changing the signal aspect from the mast table will choke up and take anywhere from seconds to several minutes to change. The issue seems to be most prevalent on startup, and waiting 5-10 minutes before running will get the choke out, but if the system is under heavier load such as 5+ trains usually it will start to choke up again. I am convinced it does not have to do with the CMRI network as I get the same result running the layout in simulation at home on a very powerful computer. Any help on this issue would be much appreciated Thanks, - Hunter Shelby

Running JMRI 5.11 and have created a number of Signal Masts, each using DCC Signal Heads (I use NCE Light-Its). I am wondering if I have setup something wrong, or if someone can some provide some guidance on the following situation. I have a turnout which either continues the mainline, or if thrown diverges to an end track. I setup two rules for my signal mast (Signal-A). The first from Signal-A to Signal-B (both on the mainline) and based on the turnout being set to Closed. For the second rule, it is Signal-A to Virtual-A where the turnout is Thrown. Virtual-A is defined as a Virtual Signal Mast as it is at the end of a track line. However, Signal-A is always at a Stop state because Virtual-A is never set to a state unless I manually set it to Clear. When I do this, and if the Turnout is Thrown, then Signal-A correctly changes to Clear. But otherwise Signal-A is not in the correct state because it is linked to Virtual-A and Virtual- is unset. Am I using the Virtual Signal in the right way for these situations where the track ends?

All, Recently developed a problem with one of my older diesels, an N scale Bachmann with Econami factory installled. Def used is ECO-100 Diesel. Sound was fine, loco would not move. On the programming track, I loaded the loco's DecoderPro roster entry file and used the CVs tab to compare all values. No differences. Loco still not moving. Did a Reset. Loco now moves. Rewrote all CVs from the loco's roster entry file. Loco now will again not move. To emphasize, these settings have worked fine for years. Are there some settings somewhere that DecoderPro can not see or change, except by reset? Regards

Set up my class yard Arrival track as a "Location". It's length accommodates the longest trains I run. Set up Switcher (train) to PU at Location "Arrival" and SO at yard Location. When I tested, had a 30 car train arrive. The manifest showed all 30 cars set out at Arrival. Ran train "Switcher". It only picked up 22 of the 30 cars. Viewing the build report 8 cars were excluded as class track for those 8 cars was full. What puzzles me is that those 8 cars were not shown as "hold" on the csvmanifest. Any ideas? Doug