开云体育

Tony, When you refer to “groups”, do you mean kernels? If so, this is an expected feature: JMRI treats a kernel of cars as one move, so one can easily end up with more cars than moves when using

If you want it only to happen when you decide, then a route will do it. If you want it to happen every time, then use Logix. Chris.

Would creating a “route” work as well? Thomas Cain Indianapolis, IN atsf93@... See my NEW website and layout at: www.atsf93.com Modeling the Eastern Illinois Santa Fe from the

This can be done through Logix. This is how I've done it. IX:AUTO:0003C1? P - Bonton Yard Approach? ?(The Turnout name) [x]? R1? IF? Turnout "Bonton Yard Approach - BTC" state is "Turnout

Apparently i can only set the road name and type for the engine. It only took 7 cars perhaps because it could only terminate 7. After fixing the terminal track types accepted a new build now again

Hi all how do I get layout editor to throw three turnouts by clicking on one turnout.

i created a passenger train and allowed it to select from every passenger car. There are over 150 cars from multiple railroads. But i set the road name to be penn. ?i asked for 10 cars and an 1

Mike, Yes. There's no point making further comments until I see that. It answers a lot of questions you can't. Dave in Australia

Well, I completely reinstalled JMRI 4.17.7 on a Pi 4 with a fresh Raspbian image with the same results, even after disabling ipv6 both in JMRI and in my WiFi config. After startup, I still get 3000ms

Thanks Steve! You've done great work and I want to thank you for all you've done! I used to blog under "The Basement Railroader" a while back and wrote about how to get JMRI + Sprog3 going on an RPi

I believe things are set up properly. Using A Power-Pro - metal box for NCE Running Decoder Pro 3. Tried to read decoder - programming track mode Got "stopping due to Error. Timeout talking to Command

Scott, One (sort of) random suggestion is to disable the "Broadcast IPv6" for WiThrottle Server. You can do this under Preferences, WiThrottle. --SteveT

Got it working. Couple of observations. 1. It seems much slower to start up new windows. I assume there is still debug code in it, since it's a test version. 2. Window position is remembered but

There isn't anything currently in the LayoutEditor to do this but…?I've actually worked on code to do it… The modular crowd would sometimes like to be able to spin a panel by 180 in order to

Charles, Just to be safe, I would make sure that /home/cmeo/.jmri and its contents are backed up. 1. Rename /home/cmeo/JMRI to something like /home/cmeo/JMRI_4.16. 2. Download and expand

Nelson, That was a good explanation. To eliminate the network and Rpi nodes, what happens if you connect to the web server using a Windows browser at localhost:12080? I assume you have not change

Sure: 2019-12-15 10:30:44,003 util.Log4JUtil INFO? - * JMRI log ** [main] 2019-12-15 10:30:44,045 util.Log4JUtil INFO? - This log is appended to file: /home/cmeo/.jmri/log/messages.log

Dave: The system that our JMRI resides on is a Windows system, the JMRI is I believe? installed over the previous release. Let me explain how our system works. We have a windows box which runs

What version of JMRI do you have on the new Windows 10 system? If it’s not JMRI 4.17.7, try updating to that. Otherwise, put the file where somebody can take a look at it please. Bob -- Bob

If you’ve copied files from one roster/ directory to another roster/ directory, you just need to run “Recreate Roster Index” (not “Recreate Decoder Index”) to make them accessible. Bob