开云体育

the It is specifically the LH200 handheld which doubles as a command station. Although it can program decoders on the main and on a programming track, it cannot communicate with decoders over

Ouch is right!!! I don't understand the Lenz product line. What should we put in the web pages, etc, so that other people don't hit the same problem? E.g. is it just the Set 02 that won't work with

Bob Thanks for the help but I have just heard from Debbie Aimes from Lenz and the LH200 can not be used to program decoders over the expressnet. I have oredered an LZ100 command station

The programs are written to take control of the serial port, so only one can run at a time. For those using a Digitrax system, Alex Shepherd has built a "client-server" capability. You can run one

we're not too consistent on that) contains all of the code that exists. It's got a complicated menu bar with lots of things to try, and it's missing even the most basic of instructions, so it's

If I understand your question properly, there are two parts to the answer. Right now, "running trains" has only rudimentary support in the code. People seem to have been more interested in aspects of

Yes, it's pretty clear that everything is communicating. Can Windigital 8.5 program decoders? If so, that means that the command station will accept programing commands, and there's something wrong

bob,I was interested to see that I was not the only one having problems downloading the other programs used with the decoder pro.we(my friend and I) have installed decoder pro and find i very easy to

Bob I have just tried to control a loco with Windigital 8.5 and it works so the Com port is set up OK. Alex

xbus etc and it is as far as I can see acommand station running Ver 3.0 of the software. If it does not work it looks like I will ahve to spend another ?150 on an LZ100!!!!!!! Not a happy

That's interesting. Those are messages from the LI100, so the program is successfully exchanging messages with the LI100 over the serial link. 1 4 5 is from the LI100 itself, and means that

Thanks for the reply. I have tried to send the command but there is nothing in the monitor. However when i try to ident the loco settings or decoder settings from the programmer the following

Is there a difference between the LI100 and LI100F? A systematic approach to diagnosis will probably help here. First, get a consistent set of settings. The best starting place for settings is 9600

I test DecoderPro on other protocols (NCE, Digitrax) under XP Home and it works fine. Would XP Pro be different? I can try the Lenz protocol with XP Home this evening, will let you know. Bob --

Can anyone tell me please if DecoderPro works under XP Pro? It seems to load and run well but I have been unable to get it to talk to the interface. I get Program error: talking to command station.

Can anyone please tell me if DecoderPro works with XP Pro? I took delivery of the LI100F on saturday and have it connected to a Set02. The software loads and appears to work correctly however I

No problem Bob. Working with Robin the problem is fixed. It turned out that the first two function lines said "forward" instead of "forward" then "reverse". Once that was changed then the

Sorry for the slow reply. Were you able to get this sorted out? I met John Forsythe of TCS today at the show. We went over his decoder line, and discovered that I had put some of his decoders in the

I'm still working the issue (at my "day job"), but it won't be fixed for "Jaguar"... -Dave

The issue is the same issue that was the problem on the PC-- the serial javacomm package for Mac OS X doesn't support the LocoNet baudrate quite right. If you run Mac OS 9, MS-100 should work OK, but