--- In jmriusers@y..., Bob Jacobsen <Bob_Jacobsen@l...> wrote:
I have checked all the manuals I can find on the command station,
xbus etc and it is as far as I can see acommand station running Ver
3.0 of the software. If it does not work it looks like I will ahve
to spend another ?150 on an LZ100!!!!!!! Not a happy prospect.
McKays who I bought the LI100F from assured me it works. Lenz
themselves sell an Xbus adapter kit specifically for the LI100F and
the Set 02.
Alex
That's interesting.
Those are messages from the LI100, so the program is successfully
exchanging messages with the LI100 over the serial link.
1 4 5 is from the LI100 itself, and means that "instruction was
successfully sent to command or normal operations have resumed
after
a timeout"
But "61 82 e3" is a bad sign. It is from the command station, and
means "Instruction not supported by command station".
It looks like everything is communicating OK, but the Set O2 is
refusing to do a programming operation from the XPressNet. I'm
not
familiar with the Set 02. Is there some option you have to set to
make it accept this? Is it a full XPressNet command station?
Bob
--
--------------
Bob Jacobsen (Bob_Jacobsen@l..., 510-486-7355, fax 510-495-2957)
