I don't understand the Lenz product line. What should we put in
the
web pages, etc, so that other people don't hit the same problem?
E.g. is it just the Set 02 that won't work with the LI100?
Bob
--
--------------
Bob Jacobsen (Bob_Jacobsen@l..., 510-486-7355, fax 510-495-2957)
It is specifically the LH200 handheld which doubles as a command
station. Although it can program decoders on the main and on a
programming track, it cannot communicate with decoders over express
net and therefore cannot be used through the LI100F with software
like DecoderPro to program decoders.
Perhaps you could just mention the fact only the LZ100 command
station can be used with the LI1200F interface and your software,
but Lenz should make this much clearer in there documentation.
Alex
