开云体育

Hi; You're right, exporting a roster entry only exports the regular data in a xml file, images and icons are not exported, but their pathes are, and they're relative, so you could somehow synchronize

Code has been pushed and merged ( https://github.com/JMRI/JMRI/pull/13512 ) , feature will be in next release. Documentation was updated accordingly (

That's it. Thanks you Dave. JeanLouisDelestre@... ----- Mail original ----- De: "Dave Sand" <ds@...> ?: [email protected] Envoyé: Mardi 8 Octobre 2024 17:09:10 Objet:

Make sure the Layout Editor "Options -> Use Direct Turnout Control" menu item is NOT selected. This option used the left and right mouse buttons to change the turnout position. Dave Sand

Hi, When I click on a turnout in the turnout table, the layout panel is correctly updated. But when I click on the turnout in the? layout panel, it doesn't upade neither send the appropriate DCCC

Peter Ulvestad has fixed this so the decoders DN147* will be included in the next test release JMRI 5.9.5 and the next production release JMRI 5.10. https://github.com/JMRI/JMRI/pull/13516 Daniel

Many thanks to all that gave their opinion on the matter. Regads, Harry

Daniel, For Digitrax decoders, the K1C (or A0 and others) are form factors of the decoders to fit different models or connectors. They all have the same firmware. The issue we have here is Digitrax

Thanks Bob, was thinking it might have been related to BEMF and didn’t consider the transponding, will give it a shot later today. Tim

This headlight behavior might be part of how Digitrax transponding works. Perhaps there’s a way to turn transponding off in the decoder if you’re not using it? Bob — Bob Jacobsen

Same boat different thread. I’ve submitted an “Issue” for the family of DN147xx decoders on JMRI Github this morning. HTH, Tim Sent: Tuesday, October 8, 2024 6:07 AM To:

The DN147 currently shown in DecoderPro is the model which became redundant in 2002. ?DN147K1C's are the 2024 variant which have a version number of 204 from memory. I think it's unfortunate that

Harry, The only decoder I can find is Digitrax DN147. I don't know the difference between it and DN147K1C. One option is to open an Issue on GitHub, requesting that decoder to be added to

The speed issue is actually something I see with the decoder before even changing the address or reading it into the roster. The forward light is very dim in reverse, when it should be “off”. It

I have JMRI v5.6 / Java 11.0.17 in my computer but cannot find the newer decoder mention on the reference. Can anyone tell me if this decoder is included in a newer version of JMRI? Thanks, Harry

Thanks for that information, Ken. The block signal was one of the thing the I was never clear on the concept of how to work it. No problem in making it an ABS signal. JMRI makes it easy! Doug

Sorry I don't have a solution but I may be able prevent you from following some advice I got. Don't try to trick the DN147A0 (2024) to think it is a DN163A0 through DecoderPro. ?I tried and the

Doug, Only thing I see is the intermediate signal between Bealville and Cliff would not be under dispatch control. It would just be ABS between the other signals. You can keep the block detectors

Pete, Yes the detailed build report did help. First issue: I had entered the wrong car length for my Cement hoppers (too long) for their assigned car spots. Second issue: While making some changes I

Ermanno, That feature doesn't exists today, but it will be added by PR #13514. https://github.com/JMRI/JMRI/pull/13514 Daniel