开云体育

Hi, I am new to JRMI. Do you know if there is somewhere (Web, PDF, video) a place to get information for about aytomation using warrants, but a very simple example?

Vinny, Can you show us the batch file you are trying to run? Daniel

John, I am not sure that this is the official method but it does work. Copy the jmri.conf file from the JMRI install to ~/.jmri. Edit the file and add the serial port names. If more than one,

Robert, Followed your instructions to reload ("sudo udevadm control -R”), it gives me the same results, which appears as I had before. This isn’t a new issue, after replacing the PH-Pro adapter,

Vinny, You can use an indirect notification from Windows using the LogixNG "File as flag" expression which can then run the Jython script. See

Vinny, You cannot call a Jython script from outside of the JMRI/Java world. It would be helpful to know what you are actually trying to do. What does the bat file do? Dave Sand

Jim, If you feel more adventurist, you can download a nightly build https://builds.jmri.org/jenkins/job/development/job/packages/ which already has the fix. I use these all the time. -- Peter

...rephrasing, how can I call a jython script x.py from within a windows/DOS batch file?

Well, that did not work. What about this... how would I call the jython script from the command line? That would solve this for me.

Hi En-TACT. As Ken has suggested, the LEDs on the USB Interface blink briefly while there is communication, on steady, you have a problem. Please install ALL the USB Interface Jumpers, see Dave

Dick, I understand what you are saying. Since I have not read enough about SML and what prototypical scheme I would want/need to use, I will stay with SSL for now. I've gotten it to work albeit

Hi Dave Thanks for your great analysis and suggestions, all of which I will follow. I used the 400 series for the blocks and the 50 series when I made the turnouts their own blocks. After I make all

Ken, Your last upload was good. I have some initial comments. LT1 is a left hand turnout, but you want the diverging leg to be the normal route. In Layout Editor this is done by using the

Steve: Thanks... obviously I didn't read the release note carefully... In my defense stuff so rarely breaks... I also apologize for not saying Engine Driver with Android... Jim Albanowski

John, I think that the naming of the two systems leads to confusion. SSL was named 'Simple Signal Logic' because it was the first (and originally only) JMRI method to do ANY signaling control. As new

I appreciate it, Bob. I'll try it.

I don’t know much about Windows, so I’m probably not the one to help with this unfortunately. And the following suggestion might not make sense. Is there a command that will open another window

Bob, I got the logix NG to call the script that calls the batch file however, the batch file only stays in it's loop for 1 iteration. When I run the batch file outside of JMRI it opens a DOS window

From the 5.9.4 Release notes: WiThrottle Server does not work properly in this release. (crashes when sending Turnouts or Routes), It will be fixed in 5.9.5 and 5.10. Workaround is to disable Turnouts

Jim, Start JMRI. Try to connect to the WiThrottle server with the Engine Driver app on your Android phone. Then go to JMRI menu Help -> System Console. Click the button "Copy to clipboard". Paste it