开云体育

Will look tomorrow when I get to club Sent from Yahoo Mail on Android

User with problems with a DCS240 and a locobuffer. I would like to know what the version number of the loco buffer is.. Its the first number when you select Loconet>LoconetStats. Walt

If you have scripts referring to “jmridefaults.py”, please replace that with a reference to “jmri_bindings.py”. Or you could copy the “jmri_bindings.py” file to be named

My programing track is less than 3ft away. We upgrade from a dcs 200. But we also have 5 sections each control 30 ft at max. My DCS240 is the main and controls antennas, programing track, and a 2

I would like to add some interesting observations here, I also hooked up a new dcs240 from a dcs 100. Initially I had a 30 ft run from the command station on 12 gauge running to a dcc specialties

I'm running 4.8..,

I get that error when the PR3 is in the wrong mode on my home set up with a DCS200. Our club uses the 240 just for running the layout so we haven't run in to this with it. So not sure how to change

Did you do the update v.3 on the DCs240? [Non-text portions of this message have been removed]

Will need to get back with you, but I installed newest version that was not a test version, I think 4.8 production release Sent from Yahoo Mail on Android On Mon, Aug 14, 2017 at 9:28 PM, DAVID KLEMM

Upgraded from 4.9.1 to 4.9.2 and now it does not like this line from jmridefaults.py and stops dead before showing any of my Layout Editor Panels. Any thoughts? 2017-08-14 21:18:35,692

What version of JMRI are you running? The 240 was addressed around 4.7.2. David Klemm Sent from my iPhone 7 Plus ________________________________ Sent: Monday, August 14, 2017 7:12:32 PM To:

no, I'm asking if its a valid fix

Ray, I believe AnyRail lets you export a layout to an image file (JPG, PNG?). If so, then the easiest thing to do would be to place that image onto your panel as an icon. I've built schmatics of my

ronmerrill69 Am I reading this correct? You fixed the problem by uninstalling the driver and reinstalling it, Walt

I installed a DCS240 on our Club layout. I did my research on the new system, reading online that the DCS240 used the same drivers as the PR3, so I installed just prior to a week of vacation. the

Terry: But when we ask a question about how something is set " No change" is not how it is set!

On the PanelPro main menu, Panels menu, Load Panels... item. Then navigate to your XML file to select it and open. The AnyRail process is a bit rough still. If you get any Really Obscure Errors,

Bob, Walt, Peter et al. I admire your patience. It is my opinion that people who expect 'no charge' help of any kind should have an attitude that encourages people to provide that help.

Not so much that the entries get changed but how they affect the program can have changed. As an former remote support computer maintenance person this is the first time I have had a user with a

Why would the developers make that possible ? They'd be making their own problems I've used JMRI Since Release 1.8 and never made a preference change all the way up to 4.6 Nor did the new release make