开云体育

Sorry to reply to my own, but I just had another thought. This may be a misunderstanding of the C/MRI protocol. The NS (number of bytes of board configuration, e.g. ceiling(n_boards/4)) is sent as a

Bob, thanks for the very helpful reply. I know I have a long way to go to understand how JMRI works, but it is a fun venture. Thanks again. Jerry Michels

Hi Dave, Egbert David, I tried as you suggested but no change as to what happens. I then removed 4.8 completely including the bits in C:\user\fraser\JMRI and renamed my user files folder

Will JMRI bridge multiple OpenLCB connections? Will an event on one segment be seen on the other segment? Regards Nom d'Inet

Zimo sound decoders can have volume up/down function keys allocated Hornby TTS decoders have something similar in concept. I'm sure other makers have similar, but each will have its own mechanism. -

Thanks Ken. I had already started removing JMRI from the laptop. After uninstalling 4.6 and removing any files left behind, I installed a fresh copy of 4.8. Unfortunately no change. As there appears

Hi As an aside I use frog juicers on my HO Module and have had to fit an on off switch as in some set ups they "bring down" the command station when tripped (Ironically it all works OK without them!).

The following is rearranged a bit to make it more readable. e.g. Agreed. The only thing that the LocoNet provides it the part in []. e.g. [B2 42 50 5F] called the raw data. The rest is JMRI trying to

You can do this, but it involves extra non-displaying SignalHeads. Roughly: 1) Define an internal / virtual head that is on the entrance to the furthest turnout. It’ll show red if that’s set

We have a (partial) implementation of one set of German signals, see: http://jmri.org/xml/signals/DB-HV-1969/index.shtml There’s a comment on it that says "Missing aspect mapping, not finished.”

It looks like somehow the steps that create the “version” code aren’t being run. When you tell Ant to do the build, the “update-template-code” step handles that. Do you have Eclipse

I am working on an installation of Team Digital BLOC8D for our club and would like some help on the readout I get when monitoring the LocoNet via Decoder Pro. This is the sequence I get when using the

Ah, I must have missed that. Thanks! Sincerely, Steve

Bob Z, One clue if you do use SSL is that to combine turnouts, you need to create virtual signals and then make the real one 'distant' to the virtual so it combines the logic results. When 'distant'

I'm also Win10, Eclipse Oxygen 4.7.0, and doing fine with HEAD. I can run or debug just fine and not getting similar errors. -Ken Cameron, Member JMRI Dev Team www.jmri.org

I have a JMRI git repository on my Win 10 system. in Eclipse Mars 2, 4.7.1, 4.8 and 4.9.1 build correctly. 4.7.1 runs fine from Eclipse including Locobuf and CMRI interfaces. However, I get the

The large majority of locos have all the wheels on each side directly electrically connected. So I am not sure how the frog voltage could ever be different from the track voltage? Andy

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the jmriusers group. File : /Bob Z Virtual Signals/SignalLogicKiskiiWest2.png Uploaded by

Bob Z, Check out my web page http://quaker-valley.com/CTC/QV_CTCnew.html about mid way down is a picture of the layout editor panel with all of the intermediate internal signals revealed. I used SSL

Please see the file "LayoutDiagram.png" in folder Bob Z Virtual Signals. I am wondering if Simple Signal Logic will meet my needs. I am trying to control the signals at CP Kiski westbound (to left)