开云体育

Yes. the 2 Radio buttons for the programmer were set to internal. It confused me. It saw my command station fine. Thanks!! Jay

Ah, the sweet taste of success.=I moved the jmri.conf file to my directory "C:\Users\ModelTrainNut\JMRI" and added JUST ?default_options="-J-Djogamp.gluegen.UseTempJarCache=false".=And

Klaus, That is now working for me. I got it into the jmri.conf but for my Eclipse sessions, I found I had to add it as a 'VM Options' in the configuration for my run/debug configurations. However, I

Bruce: One question, if I may. Have you tested JMRI with jmri.conf line default_options="-J-Djogamp.gluegen.UseTempJarCache=false" too? This bypasses the jogamp_exe_tst* process, which I think causes

Hi, I have been running JMRI 4.6 with my CMRI system for some time without issue. I'm using a USB - Serial converter with a Windows 7 machine. I recently tried updating to one of the 4.7 test releases

As Bob said, it sounds like you have selected Simulator as the connection type. Most Simulator connections deliberately return a value of 123 for every CV read, as a result the DCC address will show

Bob, Loaded v4.9.1 this morning on two machines - my train room desk top (Win10, 1.3gh, 4gb ram) programmed and read a bunch of locos with the Sprog 3 - no problems. The second machine - Acer laptop

Any program running on a PC can be slowed down by memory constraints, too much activity, or disk space issues. Also, connections to other devices can make it seem extremely slow. I would advise to not

Steve, Which version of JMRI are you running? What command station model are you using? Are you using "flashing" aspects on SE8c signals? LocoNet can become VERY busy when flashing aspects are used,

The production version was frozen for testing, so some updates didn’t make it into JMRI 4.8. They’re in the JMRI 4.9.1 release that came out shortly after. Re-installing those decoder files should

Open Preferences, select “Defaults”, and check that your hardware connection has been selected for the programmer (and in most cases, everything else too). It sounds like you’ve got the

Any frog power connection only involves 3 wires. The 3 connections usually come free with your switch motor. Andy Reichert Sent from my cost effective $15 keyboard.

This new release seems to have populated every field with 132 in the programming screen. I opened up an existing engine when this happened. The DCC Address was messed up too. Jay

I know I'm dragging this up from waaaaay back, but I've been hanging on to a bunch of TracTronics SECSI boards and am looking for a more modern way to run them. It looks like there was once some

The very recent update for DecoderPro definitions for SoundTraxx (TSU2) doesn't appear to have made it into 4.8. I think this means that the update needs to be reloaded after installing 4.8. Or am I

I have been running over 20 frog juicers for over 2 years and no problems what so ever. David

Fraser I have had a working layout for 4 years with 4 duel frog juicers 2 for reverse loops and two Crossings at grade with no problem. There only draw back is you cant run DC over them and since I

Here is a different troubleshooting procedure for serial ports on Linux: Open a Terminal window and put in this command EXACTLY (except for the double quotes): "while : ;do clear;ls -lt

Yes, the SPROG is actually a basic DCC packet generator with a booster and a CV programmer. To keep cost and bulk low it was designed so much of the code and user interfaces (command station code,

Dick, Thank you for your prompt response. I do have a fairly large layout, with BDL-16 block detectors, SE8c signal drivers,switch controllers of various types, etc. I noticed that it would sometimes