开云体育

Thanks, I will take a look at it in more detail.? I did upgrade to a newer version of Anyrail in the last couple of months.? After I do some research I will contact anyrail about this. Seth

Seth, The "West Mainline" block extends beyond the ends of the turnout legs for turnout "TYard West". Since the block boundaries are now at anchor points, the turnout position is not relevant. It

Mike, The session.log file has the current/last session. The messages.log file has all of the log entries up to 1 MB. The "No view" message is curious. The "StoreAndCompare" messages are from a

I have uploaded the file to ProblemsBeingWorkOn Seth Olitzky #234795 I also installed 5.8 and still have the same problem. I will attempt some debugging on my own later today. The only block issues

Dave, Thanks for the quick response! Note that I am laying out track and turnouts on a new panel. Chopping and changing like crazy. Session Log seems to reset each run, so when it bombs again, I'll

Ken C, An update. First of all Thank you. The virtual signals all named and then moved to the real hardware names even though some but not all of the real hardware is in place on the railroad. The

I have recently setup an EX-CommandStation based on an Arduino Mega and I'm really liking it! I'm currently running it connected to RPi3b running JMRI and using WiThrottle Lite on my phone. Each time

I have recently set up a EX-CommandStation connected via USB to JMRI running on a headless RPi3b that I had laying around. And while I was quite happy with the idea of this setup, it was indeed slow

The following items have been added to the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/Ken Fordham/Ken Fordham Panels.xml (

Hi En-TACT. Forget I mentioned making the Cab Address of the USB Interface to “10”. You’ll be using the USB Interface at the DEFAULT Cab Address of “3”. Connect the USB Interface to

Seth, I am not able to recreate the problem using JMRI 5.8. Make sure there are no block issues using the Layout Editor "Tools -> Check" menu items. You could upload the layout data xml file to

In the last transit step, "LoadTrainInfo" the next transit, then "Terminate" current transit after a 1.5 second delay. The delay allows the next transit load get started. -- Ken NYNH&H, Old Colony

Ron, What happens if you maximize the TigerVNC window _before_ opening the preferences window? Also, try <ALT+space> to get the window menu to resize the window. This page might add some

All. I tried both editing the line and deleting the line as Peter suggested, but this made no difference. I have uploaded a couple of screen shots to the Photos section (Preferences Title bar off

“How do I change the cab address of the USB interface to 10 - sorry I'm new.” The information you seek is included in the documentation that came with your USB. If you no longer/never had

I have rebuilt a new Panel Pro layout/profile importing from Anyrail.? Its a copy of a existing layout/profile with an additional siding and two turnouts. In testing the new layout/profile and my

It was changed to from COM10 COM3 after the screenshot. How do I change the cab address of the USB interface to 10 - sorry I'm new.

I’ll give it a try, glad I asked. Thanks. John Bauchiero - D&H Model Railroad - NCE PH-Pro & PowerCab, Pi4b, DCC-EX - JMRI current test version

John B, Here is the suggestion. You create virtual signals at first. Give them meaningful user names. Build the logic for them. Later when you get real hardware, you 'move' (it's a right click

What he means is, set the cab address of the USB interface to 10. And your USB interface isn't assigned to COM3, it clearly shows COM10 in the image you posted! Steve "Breezlys"