开云体育

David, We are assuming you have downloaded JMRI from our website and not a third-party website (we can't vouch for them). http://jmri.org/download/index.shtml If you do a search for "malware" on this

David, You may have to temporarily disable antivirus protection. This is a problem users of some antivirus software face every time we release a new JMRI version and there's little we can do to

Thanks Dave!

I have tried all ways to get around this but still can not open it says malware infection File Rep Malware David Brown

On Tue, Aug 13, 2019 at 03:15 AM, whmvd wrote: > > Hi David, > > You will find that it did not say that on closer inspection. > > > These things work on the assumption that if they don't know a

Check your LocoNet connections. What you describe is consistent with the connection between JMRI and the command being OK, but something preventing LocoNet connections beyond the command station to

I would ask if this had been tried with 4.12. As in the release notes, any layout prior to 4.12 should be updated to 4.12 first (and run) before updating past 4.12. Running would include saves of any

Rick, Chris, The code has been fixed to handle multiple visits to the same segment. The pull request has been submitted and should be included in 4.17.4 test release. Dave Sand

A turntable spur is normally a single track segment, optionally with a block assignment. The track segment is not connected to anything except its turnout ray location and an end bumper. This means

It's unclear if you're using the same computer and panel(s) from home and at the club., and how JMRI is configured, nor what you're looking at, so unsure where your issue is, so I'm goign to go over

F1 is typically bell. if your DECODER has a function pad F1, then you could hook up a light to it, and then you'd get a bell sound (assuming you had this before, of course) AND the light would come

I normally see that error when use the wrong block on one of the panels. Check the blocks that neighbor toblock "Bonton TT Spur 1" and make sure they're really the same. II've found blocks with ALMOST

It is working. I did not have the connector to the decoder pushed all the way on.

Frank, It’s possible, but we need to get some answers to

Hello All, I bench tested everything, everything being the command station, PM42, BDL168 and DS64s at home and got them setup properly in JMRI. I took it all to club and have started setting things up

Jan, Now I AM confused. What I want to know is this:F1 is the bell on my decoders. DP has function pads. If I connect something to the F1 pad, what happens to my F1 bell? Jim

Roger, It depends on your train and block length. If your train is shorter than that block, the train will slow waiting for the "tail" of the train to exit the previous block. --SteveT

Chris, Sorry, I missed your upload back in July. It appears that block connectivity cannot handle the same turntable definition on two different panels. If I remove the block assignments from one of

thanks, somehow I missed this thread when it first went up.?? I'll try a Pi4 as soon as I can get my hands on one!

Since I posted and uploaded the XML file, I've redrawn both the main, and the local panels pertaining to the turnatable.and the problem is still there. I've now upgraded to JMRI 4.16 on all machines