In your Preferences, I would expect WiThrottle tab to show port 12080 (based on your description). The Web Server port is something else, shown in Preferences under the Web Server tab. In the browser, you will need to connect to <>.2:that-other-port
The default port for the Web Server is 12080 and the default port for WiThrottle is 12090. If those ports are the same, the WiThrottle server will get the port, but the Web Server will simply be blocked from working (the logs under System Console will likely show something to this effect).
Hope this helps,
Randall
toggle quoted message
Show quoted text
On Aug 8, 2017, at 13:23, harry.rigby@... [jmriusers] <jmriusers@...> wrote:
Can anyone help? JMRI runs OK on a Windows 10 PC. I can control throttles, turnouts and I have a working panel. Using Engine Driver on an Android 4.4 tablet, it connects OK to 192.168.2.2:12080 and I can control throttles, turnouts and routes. However, when I select "web" it shows either a blank screen or sometimes a screen full of text, which looks like a status report. If I try to connect using a browser to 192.168.2.2:12080 I get a "no response" message.
In preferences Frames is disabled (as per default) and I have started the WiFi Throttle server and the web server with the application; both appear in the "startup" list.
Is there a setting I have got wrong?
Hope someone can help.
Best wishes
Harry
|
Uh Mark, where do you think Radio Shack got theirs? <g>
Seth Neumann
Mountain View, CA
Sent from my iPhone, please excuse the typing.
toggle quoted message
Show quoted text
On Aug 8, 2017, at 8:42 AM, Bob McCown rmccown@... [jmriusers] <jmriusers@...> wrote:
Great, thanks. I, too, bought a bunch of cheap Chinese ones and they
wernt any better quality than the ones I got at the local Radio Shack
when it closed.
On 8/7/2017 4:54 PM, 'Mark Juett' modelrailroadbuilder@...
[jmriusers] wrote:
Bob,
Yes many of the little push buttons are unreliable. On recommendation of a
friend I bought a large quality from We Hxoxoxo in China. I had several
split open. It was no bargain.
I have since gone to Grayhill 706-30-601RED for just above $2 each and
have
had no issues since.
Mark
-----Original Message-----
From: jmriusers@... [mailto:jmriusers@...]
Sent: Monday, August 7, 2017 3:33 PM
To: jmriusers@...
Subject: Re: FW: [jmriusers] Panel hardware
What about for pushbuttons? Those tiny ones that are around are very
unreliable.
On 8/7/2017 4:24 PM, 'Mark Juett' modelrailroadbuilder@...
[jmriusers] wrote:
Billybob,
You are correct in that Mike B does not provide much electronics. His
forte
is the casted metal levers and plates. Likewise Rick R provides the
molded
plastic reproduction parts. They do however, recommend parts that you can
buy from most electronic suppliers.
Several years ago Rick suggested the Alpha 10YD062 rotary switch available
from www.Mouser.com It has been replaced by 105-SR2511F-62FN.
Unfortunately
the min on this is 1000. Although the cut over is at 30 degrees it is a
multi-position and 2 clicks get 60 deg. Not perfect.
However, the 105-SR2511F-62FN is a Grayhill single deck 2 position SPDT,
rated at 200 ma, 28V, DC 115VAC, with a 60 degree rotation. Only $11.58 in
single quantities. From there prices go up. It has a lug connection
but not
easily soldered. The data sheet shows a solder lug style available.
For controlling signals you will need a 3 position switch. Grayhill
105-SR2511F-62FN is similar in a 3 position. Same price.
I have not taken the time to do an exhaustive search of Mouser to find the
perfect match but it may be there amongst the many parts that they
have. If
you come up with something let us know. As I get some time I will
search, as
I have plans to build a reproduction CTC machine (USS&S).
Mark Juett
From: jmriusers@... [mailto:jmriusers@...]
Sent: Sunday, August 6, 2017 11:01 PM
To: jmriusers@...
Subject: Re: [jmriusers] Panel hardware
There are some limits to what CTCParts.com can provide.
CTCParts.com specializes in the "plates" one uses on a CTC machine.
This is
where Mike's product offerings excel.
In general, Mike doesn't offer much in the way of electronics things like
rotary switches, pushbuttons, or lamps. One exception is a pushbutton
which
mimics the "feel" of a US&S pushbutton.
What are the alternatives?
For these "common" electronics components, your best bet is likely to be a
general-purpose electronics supplier. In the US, some suppliers include
Mouser.com, Digikey.com, All-electronics.com.
Rotary switches with 60 degree rotation (for US&S machines) or 90 degree
rotation (for GRS machines) can be tough to find off-the-shelf. They
do show
up occasionally. And Mouser and Digikey have often "mis-cataloged" a
manufacturer's parts as 30 degree when they really were 60 degree or 90
degree, so it helps to spend the time looking at manufacturer's specs for
the various part numbers cataloged by the supplier.
Last time I looked, Digikey and Mouser did not have any stock for 60
degree-indexed switches, but could provide 60 degree rotary switches for
orders of 2000 parts.
Tomar Inc., of Benton Harbor, MI, provides (or provided) some cast-brass
inserts which can be used in some "open" styles of commercial rotary
switches to convert a 30 degree-indexed rotary switch to 60 degree
indexing
or 90 degree indexing. Tomar also has produced US&S-like "knobs", but I
think that they no longer produce the knobs.
An alternative is to purchase "Alpha" brand enclosed 30 degree-indexed
rotary switches, and modify for 60 degree or 90 degree indexing. I've done
this by filling in one or two consecutive "indents" in the rotary switch
shell with epoxy. The trick is to open the thing without losing the spring
or ball-bearings. And to put the spring and bearings back into the
shell and
reassemble it, without losing the parts.
I do not have any particular recommendations for lampholders/bezels/lenses
or for pushbuttons.
Regards,
Billybob
[Non-text portions of this message have been removed]
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
|
Billybob,
Nice bit of research. However, for any of the circuits I¡¯ve seen for CTC
panels, you always want break before make types. Next is ?¡± shaft vs 6mm
shaft is less than a 1/64¡± difference, so most knobs will not notice the
difference (if they are 1/4¡± designs), the set screws can deal with that.
As for flats on the shafts or keyed mounting hardware, I¡¯ve found most MR
types seem to be rather heavy handed!! So having mounting hardware that will
prevent twisting the switch itself is important. The flat on the shaft is
critical to keep the knob in the right place, but this is easy after
installation with a couple of passes of a file on the shaft if it wasn¡¯t
equipped in the first place.
Note: We¡¯d need to check about the knobs themselves to see if they are round
or if they have an internal flat to match. That would be important to know.
-Ken Cameron, Member JMRI Dev Team
www.jmri.org
www.fingerlakeslivesteamers.org
www.cnymod.com
www.syracusemodelrr.org
[Non-text portions of this message have been removed]
|
Dale,
Here's my results from about 45 minutes work at the Mouser web site, looking only at "Alpha" rotary switches, and double-checking the part number versus the manufacturer's description. I appologize in advance for any typos. All were listed as "in-stock" when I looked these up today:
Mouser 105-SR2511F-43RN : Alpha P/N SR2511F-0403-19R0B-E9-N-W-159 - open style suitable for US&S 2-position lever, using Tomar "slug"; metric mounting.
Mouser 105-SR2511F-25NS : Alpha P/N SR2511F-0205-19R0B-E9-N-W-159 - open style suitable for US&S 3-position lever, using Tomar "slugs"; metric mounting.
Mouser 105-SR2512F-43NS : Alpha P/N SR2511F-0403-19R0B-E9-N-W-159 - open style suitable for US&S 2-position lever, using Tomar "slug"; metric mounting.
Mouser 105-SR2511F-25S : Alpha P/N SR2511F-0205-19R0B-E9-S-W-159 - open style suitable for US&S 3-position lever, using Tomar "slugs"; metric mounting - note that this is a "shorting" switch!
Mouser 105-SR2511F-43S : Alpha P/N SR2511F-0403-19R0B-E9-S-W-159 - open style suitable for US&S 2-position lever, using Tomar "slug"; metric mouting - note that this is a "shorting" switch!
Mouser 105-SR2511F-17S : Alpha P/N SR2511F-0107-19R0B-E9-S-W-159 - open style suitable for GRS 3-position lever, using Tomar "slugs"; metric mounting - note that this is a "shorting" switch!
Mouser 105-SR2612F-26-21RN : Alpha P/N SR2612F-0206-21R0B-D8-N - enclosed style suitable for US&S 2- and 3-position lever, or GRS 2-position lever; imperial mouting - requires internal modifications!
Mouser 105-SR2612F-26-21RN : Alpha P/N SR2612F-0206-21R0B-D8-N - enclosed style suitable for US&S 2- and 3-position lever, or GRS 2-position lever; imperial mouting - requires internal modifications!
Mouser 105-SR2611F-12-21RS : Alpha P/N SR2611F-0112-21R0B-D8-S - enclosed style suitable for US&S 2- and 3-position lever, or GRS 2-position or 3-position lever; internal modification required - requires a specialty "stop" washer which may not be provided and I have not seen such a washer purchasable separately.
Assumptions:
. Want a round shaft, since the flat will likely not line up with the knob screw for an obvious orientation of the switch
. require a 1/4" shaft, not a 6mm shaft
. "open" style switches require the correct number of positions, at 30-degree indexing, for the desired number of 60-degree- or 90-degree-indexed positions.
. "enclosed" style switches do not require at least the minimum number of positions, at 30-degree indexing, for the desired number of 60-degree- or 90-degree-indexed positions, and the number of "poles" cannot prevent unique identification of lever position when in position at any of the the 60-degree- or 90-degree indexed positions.
. pin connection isn't critical. FYI - SR2511 and SR2611 have "wire lugs" and SR2612 has "pc-board" pins.
Hope this helps.
Regards,
Billybob
|
Can anyone help? JMRI runs OK on a Windows 10 PC. I can control throttles, turnouts and I have a working panel. Using Engine Driver on an Android 4.4 tablet, it connects OK to 192.168.2.2:12080 and I can control throttles, turnouts and routes. However, when I select "web" it shows either a blank screen or sometimes a screen full of text, which looks like a status report. If I try to connect using a browser to 192.168.2.2:12080 I get a "no response" message.
In preferences Frames is disabled (as per default) and I have started the WiFi Throttle server and the web server with the application; both appear in the "startup" list.
Is there a setting I have got wrong?
Hope someone can help.
Best wishes
Harry
|
Locked
DDA40X Dual DCC Controllers won't work
Hello,
I have an Athearn DDA40X non-sound unit that I purchased new. I didn't buy the sound version because I prefer the loksound select/direct decoders.
My primary decoder is a Loksound Direct with all lights and the front motor connected to it. My secondary decoder is a TCS T1 for JUST rear motor control.
My primary decoder is programmed for decoder lock with CV16=2 and my secondary decoder is programmed for decoder lock with CV16=1.
Both decoders work fine and are brand new. Each decoder has separate track pick up wires wired to it, so decoder 1 picks up track power from the front trucks, decoder 2 picks up track power from the rear trucks.
When I program both decoders to the 4 digit loco address only the sound decoder will drive it's motors
When I assign the secondary decoder a separate 4 digit address and consist it with the first decoder, only the first decoder motor works.
CV15=0,1,2 depending on if I'm programming or not and which decoder I want to program.
My test track is controlled by an NCE Power Pro. My programming track is the NCE Power Pro via JMRI with a working usb-serial adapter. I can program mostly fine. When I go to assign CV15 to 2, some times it comes back unable to locate engine.
I can change CV=15 to 2 using my NCE throttle and programming on the main.
I know once I get this where both sets of wheels roll I will have a fun time fine tuning the momentum.
Any advice.
|
Locked
Re: FW: FW: Panel hardware
Great, thanks. I, too, bought a bunch of cheap Chinese ones and they wernt any better quality than the ones I got at the local Radio Shack when it closed. On 8/7/2017 4:54 PM, 'Mark Juett' modelrailroadbuilder@... [jmriusers] wrote:
Bob,
Yes many of the little push buttons are unreliable. On recommendation of a
friend I bought a large quality from We Hxoxoxo in China. I had several
split open. It was no bargain.
I have since gone to Grayhill 706-30-601RED for just above $2 each and
have
had no issues since.
Mark
-----Original Message-----
From: jmriusers@... [mailto:jmriusers@...]
Sent: Monday, August 7, 2017 3:33 PM
To: jmriusers@...
Subject: Re: FW: [jmriusers] Panel hardware
What about for pushbuttons? Those tiny ones that are around are very
unreliable.
On 8/7/2017 4:24 PM, 'Mark Juett' modelrailroadbuilder@...
[jmriusers] wrote:
Billybob,
You are correct in that Mike B does not provide much electronics. His
forte
is the casted metal levers and plates. Likewise Rick R provides the
molded
plastic reproduction parts. They do however, recommend parts that you can
buy from most electronic suppliers.
Several years ago Rick suggested the Alpha 10YD062 rotary switch available
from www.Mouser.com It has been replaced by 105-SR2511F-62FN.
Unfortunately
the min on this is 1000. Although the cut over is at 30 degrees it is a
multi-position and 2 clicks get 60 deg. Not perfect.
However, the 105-SR2511F-62FN is a Grayhill single deck 2 position SPDT,
rated at 200 ma, 28V, DC 115VAC, with a 60 degree rotation. Only $11.58 in
single quantities. From there prices go up. It has a lug connection
but not
easily soldered. The data sheet shows a solder lug style available.
For controlling signals you will need a 3 position switch. Grayhill
105-SR2511F-62FN is similar in a 3 position. Same price.
I have not taken the time to do an exhaustive search of Mouser to find the
perfect match but it may be there amongst the many parts that they
have. If
you come up with something let us know. As I get some time I will
search, as
I have plans to build a reproduction CTC machine (USS&S).
Mark Juett
From: jmriusers@... [mailto:jmriusers@...]
Sent: Sunday, August 6, 2017 11:01 PM
To: jmriusers@...
Subject: Re: [jmriusers] Panel hardware
There are some limits to what CTCParts.com can provide.
CTCParts.com specializes in the "plates" one uses on a CTC machine.
This is
where Mike's product offerings excel.
In general, Mike doesn't offer much in the way of electronics things like
rotary switches, pushbuttons, or lamps. One exception is a pushbutton
which
mimics the "feel" of a US&S pushbutton.
What are the alternatives?
For these "common" electronics components, your best bet is likely to be a
general-purpose electronics supplier. In the US, some suppliers include
Mouser.com, Digikey.com, All-electronics.com.
Rotary switches with 60 degree rotation (for US&S machines) or 90 degree
rotation (for GRS machines) can be tough to find off-the-shelf. They
do show
up occasionally. And Mouser and Digikey have often "mis-cataloged" a
manufacturer's parts as 30 degree when they really were 60 degree or 90
degree, so it helps to spend the time looking at manufacturer's specs for
the various part numbers cataloged by the supplier.
Last time I looked, Digikey and Mouser did not have any stock for 60
degree-indexed switches, but could provide 60 degree rotary switches for
orders of 2000 parts.
Tomar Inc., of Benton Harbor, MI, provides (or provided) some cast-brass
inserts which can be used in some "open" styles of commercial rotary
switches to convert a 30 degree-indexed rotary switch to 60 degree
indexing
or 90 degree indexing. Tomar also has produced US&S-like "knobs", but I
think that they no longer produce the knobs.
An alternative is to purchase "Alpha" brand enclosed 30 degree-indexed
rotary switches, and modify for 60 degree or 90 degree indexing. I've done
this by filling in one or two consecutive "indents" in the rotary switch
shell with epoxy. The trick is to open the thing without losing the spring
or ball-bearings. And to put the spring and bearings back into the
shell and
reassemble it, without losing the parts.
I do not have any particular recommendations for lampholders/bezels/lenses
or for pushbuttons.
Regards,
Billybob
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
[Non-text portions of this message have been removed]
|
Mark,
could you please provide the correct part numbers for the switches you referenced? You have shown the same part number for 3 different switches.
Thanks,
Dale Gloer
|
Andy,
The CTCParts.com web site has an introduction to CTC - see . Specifically, "Part 5: The Control Machine", at the bottom of the page, gives basic descriptions of the lamps and levers.
One thing I'm learning is that a given lever or lamp on the prototypical machine doesn't always have a simple explanation. There's always an exception. And railroad "X" did it this way but "Y" did it a different way and "Z" left that feature out and railroad "W" did something altogether different.
So, if you want to be strictly accurate-to-prototype, you need to discuss your implementation with an expert in signalling. I know that Mike at CTCparts.com is willing (eager?) to discuss, the various prototype railroad practices, including whys and what-fors, indocator colors, control machine plate shapes, sounds, signal aspects, braking distances, switch geometries, etc., and how they come together as a prototypical signal system. Getting some of his time, however, can be challenging.
Regards,
Billybob
|
Locked
Re: JMRI PanelPro - Programming Support for M?rklin CS2 / Doehler&Haass Programmer
Hi all, any news on this topic,
JMRI PanelPro - Programming Support for M?rklin CS2 / Doehler&Haass Programmer
Regards,
Moritz
|
Locked
Re: (OPERATIONS) SWITCHLIST PRINTING
Thanks Dan, regarding the Excel apps.
James Allen
jcallen1@...
toggle quoted message
Show quoted text
-----Original Message-----
From: Dan Foltz DannyDont@... [jmriusers] <jmriusers@...>
To: JMRI User Group <jmriusers@...>
Sent: Aug 6 1:51 pm
Subject: Re: [jmriusers] (OPERATIONS) SWITCHLIST PRINTING
Whoops, I skipped this message. Actually there are two different Excel Apps
for each Manifest version, if you follow that. One is for Excel 2007 or
older (back to 2000) and the other is for Excel 2020 and newer (up through
Excel 365). In MicroSoft's infinite wisdom, that made some significant
changes to VBA or internal parameters that made the original code
non-functional in the later versions. But both App versions of each of the
nine Manifest versions have been tested and function.
*Dan (Choo-Choo)** Foltz*
*?*
*"?A bad attitude is like a flat tire. You can't go anywhere until you
change it." *
*?Unknown*
|
Thanks for the recommendation. I'll check it out.
Andy
toggle quoted message
Show quoted text
On 8/7/2017 5:36 PM, rodneyblack2000@... [jmriusers] wrote: Andy,
Dr. Bruce Chubbs Volume 2 is pretty complete. His articles in Railroad Model Craftsman are helpful. Part 14 (April 2014) has a few photos. There are some references on line, but the only one I can think of off the top of my head is Mike Burgett's web site: .
Rodney
_________________________________________________________________________________________
Where would I find a definition of the functions of the individual
switches? I'm intrigued by the possibility of simulating a panel.
Andy Reichert
|
Andy,
Dr. Bruce Chubbs Volume 2 is pretty complete. His articles in Railroad Model Craftsman are helpful. Part 14 (April 2014) has a few photos. There are some references on line, but the only one I can think of off the top of my head is Mike Burgett's web site: .
Rodney
_________________________________________________________________________________________
Where would I find a definition of the functions of the individual
switches? I'm intrigued by the possibility of simulating a panel.
Andy Reichert
|
Locked
Re: New Version. 4.8 HELP
Thank you
Tony
toggle quoted message
Show quoted text
On Aug 7, 2017, at 6:44 PM, Dave Heap dgheap@... [jmriusers] <jmriusers@...> wrote:
With the Mac you are simply dragging the distributed JMRI folder from the .dmg file to your Applications folder. Since you can't rename a folder on a disk image (Readonly) you'll have to rename the old one in /Applications before dragging. Once in /Applications, you can rename either folder as you wish (it may ask you to authenticate).
Both JMRI versions will use the same preferences and User Files in ~/Preferences/JMRI .
Sent from my iPad
--
Dave in Australia
On 8 Aug 2017, at 7:01 AM, AD bklyns_baseball_club@... [jmriusers] <jmriusers@...> wrote:
Will will the new folder that you named be the old one or will it ask me to fill that in with different info
Tony
Sent from my iPad
On Aug 7, 2017, at 4:49 PM, Dave Heap dgheap@... [jmriusers] <jmriusers@...> wrote:
With a Mac, multiple installed versions are trivial:
- Simply rename the JMRI folder you dragged to the Applications folder to e.g. JMRI V4.6.
- Drag a new JMRI version to the Applications folder and rename it to e.g. JMRI V4.8.
-DO NOT rename the ~/Library/Preferences/JMRI folder. That will not work
|
Thanks for the information guys, much appreciated. Jerry Michels
|
Locked
Re: Dispatcher Panel hardware
Looks like Yahoo stripped off the photo. I've uploaded it to the files section of the group. There should be a file upload announcement with a link.
Cheers, Dennis Drury
Dayton, NV
---In jmriusers@..., <cowrr1984@...> wrote :
Hi Andy,
I'm not sure if this group strips photos but here goes. The attached photo
shows a prototype CTC machine that was on the Cascade line of the Southern
Pacific. From top to bottom the switches are:
S.H. is for the switch heater.
39NR is for switch 39 normal or reverse. This is a 60 degree switch.
40LR is for signal 40 left or right. This is a 30 degree switch with the
center off.
Toggle switch is for the maintainer call.
Push button is the code button
If you want to know what the lamps are for please ask.
Cheers, Dennis Drury
Dayton, NV
The miracle is this: the more we share the more we have.
Leonard Nimoy
On Mon, Aug 7, 2017 at 2:52 PM, 'andy_r+intelegence.com'
andy_r@... mailto:andy_r@... [jmriusers] <jmriusers@... mailto:jmriusers@...> wrote:> Where would I find a definition of the functions of the individual
toggle quoted message
Show quoted text
switches? I'm intrigued by the possibility of simulating a panel. > > Andy Reichert >
|
Locked
Re: New Version. 4.8 HELP
With the Mac you are simply dragging the distributed JMRI folder from the .dmg file to your Applications folder. Since you can't rename a folder on a disk image (Readonly) you'll have to rename the old one in /Applications before dragging. Once in /Applications, you can rename either folder as you wish (it may ask you to authenticate).
Both JMRI versions will use the same preferences and User Files in ~/Preferences/JMRI .
--
Dave in Australia
toggle quoted message
Show quoted text
On 8 Aug 2017, at 7:01 AM, AD bklyns_baseball_club@... [jmriusers] <jmriusers@...> wrote:
Will will the new folder that you named be the old one or will it ask me to fill that in with different info
Tony
Sent from my iPad
On Aug 7, 2017, at 4:49 PM, Dave Heap dgheap@... [jmriusers] <jmriusers@...> wrote:
With a Mac, multiple installed versions are trivial:
- Simply rename the JMRI folder you dragged to the Applications folder to e.g. JMRI V4.6.
- Drag a new JMRI version to the Applications folder and rename it to e.g. JMRI V4.8.
-DO NOT rename the ~/Library/Preferences/JMRI folder. That will not work
|
Locked
Re: System Console Warning Message
On Aug 7, 2017, at 2:54 PM, wmseapc@... [jmriusers] <jmriusers@...> wrote:
Paul; my settings are as you stated; yet it doesn't load quickly or restart properly. Would their be a problem with the Defaults? Slow starting can happen for a number of reasons. What does the log say when it restarts? Does it still have the disconnected command station message? Alternately, if you open the XpressNet system information tool, is there a reported command station version and type? My own mac is slow to restarting JMRI because it is getting the old at this point (I have a circa 2010 Mac mini. The last OS upgrade made it struggle ) What do you mean by it doesn't restart properly? There could be a defaults issue, but you should at least get a reported command station type and version if the communication settings are right. Paul
|
Locked
New file uploaded to jmriusers
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the jmriusers
group.
File : /CTC Panel Cascade Sub.jpg
Uploaded by : dennis95747 <cowrr1984@...>
Description : Photo of a prototype CTC machine
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
dennis95747 <cowrr1984@...>
|
Locked
Re: Dispatcher Panel hardware
Hi Andy, I'm not sure if this group strips photos but here goes. The attached photo shows a prototype CTC machine that was on the Cascade line of the Southern Pacific. From top to bottom the switches are: S.H. is for the switch heater. 39NR is for switch 39 normal or reverse. This is a 60 degree switch. 40LR is for signal 40 left or right. This is a 30 degree switch with the center off. Toggle switch is for the maintainer call. Push button is the code button If you want to know what the lamps are for please ask. Cheers, Dennis Drury Dayton, NV The miracle is this: the more we share the more we have. Leonard Nimoy On Mon, Aug 7, 2017 at 2:52 PM, 'andy_r+intelegence.com' andy_r@... [jmriusers] <jmriusers@...> wrote:
Where would I find a definition of the functions of the individual
switches? I'm intrigued by the possibility of simulating a panel.
Andy Reichert
On 8/7/2017 1:54 PM, 'Mark Juett' modelrailroadbuilder@...
[jmriusers] wrote:
Bob,
Yes many of the little push buttons are unreliable. On recommendation of a
friend I bought a large quality from We Hxoxoxo in China. I had several
split open. It was no bargain.
I have since gone to Grayhill 706-30-601RED for just above $2 each and have
had no issues since.
Mark
[Non-text portions of this message have been removed]
|
Ken Cameron
Bob McCown
Dale Gloer