Re: I hear audio in the speaker when transmitting
No, the radio is original, no mods.
no, the radio is original, no modifications. I was wondering what should I check regarding the TR relay
toggle quoted message
Show quoted text
On Sat, Jan 7, 2023 at 12:26 AM, Brian (N2MLP) wrote:
Has this radio been modified?
That is no welds
?
Check that the circuit is blocking the rec.
On transmitting?
?
On Jan 6, 2023, at 5:49 PM, marco.lafranca@... wrote:
Hi guys, thank you all for your replies. @Hugh: My radio is a 706mkiig,?it shouldn't have the monitor functionality. @davebb: I haven't tried the data socket yet.?Now I also write in the other forum. @Brian, @davebb Regarding the T/R relay (RL1 on the filter board?), what kind of checks should I do on the circuit? do you check the welds? check its driver Q1? or other? thank you
@Rick Robinson:?I've already done some checks on the screws, masses and cables. Which card in particular should I check?
|
IC7300 is only HD/ 50mhz? IC7000 is vhf/uhf/hf But a new IC7300 has a warranty.? Since you say your 7K is NIB, has it ever been powered up and checked out? Are you certain it has no infantile failures? n7mk
|
Re: I hear audio in the speaker when transmitting
Hi Jeff,
i'm using the original ic706 mic, i haven't tried another mic. I tried plugging it into the back connector as well but it's the same. Was your problem inside the microphone or on the connector? thanks
On Sat, Jan 7, 2023 at 10:11 PM, Geoff wrote:
Have you tried another mic?
I've had rf getting into a mic during Tx due to a bad shielding connection.
Geoff
|
Re: I hear audio in the speaker when transmitting
Have you tried another mic?
I've had rf getting into a mic during Tx due to a bad shielding connection.
Geoff
|
Exactly right, but a NIB IC-7000 is worth about $800 which is still less than an an IC-7300.
From: "Thomas Mccain" <temac@...> To: "ic7000" < [email protected]> Sent: Friday, January 6, 2023 5:57:15 PM Subject: Re: [ic7000] NIB Icom 7000
IC7300 is only HD/ 50mhz? IC7000 is vhf/uhf/hf On Fri, Jan 6, 2023 at 5:27 PM, Brian (N2MLP) <n2mlp@...> wrote:
My guess it worth. $500 in shape you stated
On Jan 6, 2023, at 6:24 PM, Brian (N2MLP) <n2mlp@...> wrote:
That a old radio
On Jan 6, 2023, at 4:52 PM, Danny K5CG <k5cg@...> wrote:
You can buy a brand new IC-7300 for $1000. Just sayin'.
I
hope you find a buyer.
From: "Scott Lunsford" <w4gbn@...>
To: "ic7000" < [email protected]>
Sent: Friday, January 6, 2023 9:04:38 AM
Subject: [ic7000] NIB Icom 7000
I have a NIB Icom 7000 for sale in Pensacola Florida. Asking $1200. I purchased this as a backup to my mobile rig and never have used it.?
if interested, you can contact me directly at w4gbn@...
|
All the IC7000 have been spoken for. Thanks all for the interest.
Carl
|
Loving it
73
Van
WD6FGB
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] [mailto: [email protected]] On Behalf Of Joe Sent: Saturday, January 07, 2023 10:43 AM To: [email protected]Subject: Re: [ic7000] NIB Icom 7000 I've sold many things at hamfests over the years and have dealt with all kinds of buyers. I never was insulted by a low bid. I usually tell them something like "I'm packing up a 2PM. Come back at 1:45 and we can talk". If they try to browbeat me into the offer they make I usually start to raise my price until they get the hint to leave. 73, Joe, K1ike On 1/7/2023 12:23 PM, Larry Macionski via groups.io wrote: Now-some will say I wore him out. Not so, 3000-4000 people had a chance
to buy it before me.
|
I've sold many things at hamfests over the years and have dealt with all kinds of buyers. I never was insulted by a low bid. I usually tell them something like "I'm packing up a 2PM. Come back at 1:45 and we can talk". If they try to browbeat me into the offer they make I usually start to raise my price until they get the hint to leave.
73, Joe, K1ike
toggle quoted message
Show quoted text
On 1/7/2023 12:23 PM, Larry Macionski via groups.io wrote: Now-some will say I wore him out. Not so, 3000-4000 people had a chance to buy it before me.
|
You don't? but ham radio's for investment purposes..
Last spring, at Claremore (Oklahoma State ARRL Convention) I bought a IC-7000 as close to "New in Box" as there is.. The guy was at the table next to me.. As the 2 day swap progressed his price came down and my sales progressed to where about 2 hours before the show was over and all the crowds had waned. $500 was the final price. Now-some will say I wore him out. Not so, 3000-4000 people had a chance to buy it before me.? I have one all ready in my car. But having a backup is a good thing. Saves taking a big box radio somewhere like POTA-SOTA or some vacation. I hate learning new menus and setups.. etc.
Larry W8LM
|
Thanks for the interest. Sorry, the 7000s are already spoken for. I will let you know if the deal falls through.
Carl
|
I will buy them both! Can you send me a PayPal invoice?thanks?
J.D. Barron?
KE4MD
|
KR0P
Sent: Saturday,
January 7, 2023 at 8:42 AM
Subject:
[ic7000] 2 ic7000s for sale
I have 2 IC 7000 that do not work. Both have no receive or power
out. The control heads work on another 7000. These are parts only
radios.There is only 1 mic between them. I would like $50.00 plus
shipping.
Carl
AB1DD
--
John Mardock
j@...
j@...
402-525-6111
|
I have 2 IC 7000 that do not work. Both have no receive or power out. The control heads work on another 7000. These are parts only radios.There is only 1 mic between them. I would like $50.00 plus shipping.
Carl
AB1DD
|
I have had three of them and enjoyed each.
Two I bought from an estate sale and they were Click - Click dead and I was able to fix one, bought another one as a spare and then was able to fix the third with a donor dead front panel that was repairable.
For the time I used these radios they provided great service and are absolutely beautiful radios.
A few problems and replacing a driver and other trouble issues along the way and the decreasing availability of replacement parts led me to sell (slowly) and buy an IC-7300.
The last one was sold to finance buying an IFR FM/AM 1200 Super S communications monitor.
So I am IC-7000less and I still miss them! I should have kept at least one of them, but I may get over it.
The IC-7000s are getting a little long in the tooth but are still a beautiful radio and a new one might be worth $1200 to the right buyer. I suggest advertising on Ebay to find that buyer.
73's
JD
KE4MD
|
GM Group:
I couldn't resist.
The ICOM IC-7000...
Past, present, and future it remains a remarkable, one-of-a-kind transceiver, nothing comparable from any other manufacturer to this day.
Truly, a "Shack in a Box".
PS: the comparison between the IC-7000 and the IC-7300 does not stand up. They're two different animals. Is anyone going mobile with their IC-7300? Probably not.
tnx es 73 de K3SSB
Tom G, Sr.
|
7000s and even 706 Mk II Gs still ringing
a pretty suprisingly good premium .
I would say that 500 is a really good price
(for the buyer)!
?
73 - Mac, K2GKK/5
Since 30 Nov 1953
k2gkk hotmail com
Oklahoma City, OK
USAF & FAA, Retired
Icom - Since 1972
(IC-21 was first one)
toggle quoted message
Show quoted text
IC7300 is only HD/ 50mhz? IC7000 is vhf/uhf/hf
On Fri, Jan 6, 2023 at 5:27 PM, Brian (N2MLP)
<n2mlp@...> wrote:
My guess it worth. $500 in shape you stated
On Jan 6, 2023, at 6:24 PM, Brian (N2MLP) <n2mlp@...> wrote:
? That a old radio
On Jan 6, 2023, at 4:52 PM, Danny K5CG <k5cg@...> wrote:
?
You can buy a brand new IC-7300 for $1000. Just sayin'.
I
hope you find a buyer.
From: "Scott Lunsford" <w4gbn@...>
To: "ic7000" < [email protected]>
Sent: Friday, January 6, 2023 9:04:38 AM
Subject: [ic7000] NIB Icom 7000
I have a NIB Icom 7000 for sale in Pensacola Florida. Asking $1200. I purchased this as a backup to my mobile rig and never have used it.?
if interested, you can contact me directly at w4gbn@...
|
IC7300 is only HD/ 50mhz? IC7000 is vhf/uhf/hf
On Fri, Jan 6, 2023 at 5:27 PM, Brian (N2MLP) <n2mlp@...> wrote:
My guess it worth. $500 in shape you stated
On Jan 6, 2023, at 6:24 PM, Brian (N2MLP) <n2mlp@...> wrote:
? That a old radio
On Jan 6, 2023, at 4:52 PM, Danny K5CG <k5cg@...> wrote:
?
You can buy a brand new IC-7300 for $1000. Just sayin'.
I
hope you find a buyer.
From: "Scott Lunsford" <w4gbn@...>
To: "ic7000" < [email protected]>
Sent: Friday, January 6, 2023 9:04:38 AM
Subject: [ic7000] NIB Icom 7000
I have a NIB Icom 7000 for sale in Pensacola Florida. Asking $1200. I purchased this as a backup to my mobile rig and never have used it.?
if interested, you can contact me directly at w4gbn@...
|
My guess it worth. $500 in shape you stated
toggle quoted message
Show quoted text
On Jan 6, 2023, at 6:24 PM, Brian (N2MLP) <n2mlp@...> wrote:
? That a old radio
On Jan 6, 2023, at 4:52 PM, Danny K5CG <k5cg@...> wrote:
?
You can buy a brand new IC-7300 for $1000. Just sayin'.
I
hope you find a buyer.
From: "Scott Lunsford" <w4gbn@...>
To: "ic7000" < [email protected]>
Sent: Friday, January 6, 2023 9:04:38 AM
Subject: [ic7000] NIB Icom 7000
I have a NIB Icom 7000 for sale in Pensacola Florida. Asking $1200. I purchased this as a backup to my mobile rig and never have used it.?
if interested, you can contact me directly at w4gbn@...
|
Re: I hear audio in the speaker when transmitting
Has this radio been modified?
That is no welds
Check that the circuit is blocking the rec.
toggle quoted message
Show quoted text
On Jan 6, 2023, at 5:49 PM, marco.lafranca@... wrote:
?Hi guys, thank you all for your replies.
@Hugh: My radio is a 706mkiig,?it shouldn't have the monitor functionality.
@davebb: I haven't tried the data socket yet.?Now I also write in the other forum.
@Brian, @davebb
Regarding the T/R relay (RL1 on the filter board?), what kind of checks should I do on the circuit? do you check the welds? check its driver Q1? or other? thank you
@Rick Robinson:?I've already done some checks on the screws, masses and cables. Which card in particular should I check?
|
toggle quoted message
Show quoted text
On Jan 6, 2023, at 4:52 PM, Danny K5CG <k5cg@...> wrote:
?
You can buy a brand new IC-7300 for $1000. Just sayin'.
I
hope you find a buyer.
From: "Scott Lunsford" <w4gbn@...>
To: "ic7000" < [email protected]>
Sent: Friday, January 6, 2023 9:04:38 AM
Subject: [ic7000] NIB Icom 7000
I have a NIB Icom 7000 for sale in Pensacola Florida. Asking $1200. I purchased this as a backup to my mobile rig and never have used it.?
if interested, you can contact me directly at w4gbn@...
|
Danny K5CG
Larry Macionski
Tom Gregor
Brian (N2MLP)