开云体育

Hi Adam, Challenging, to be sure. My assumption is that you are running dual boot (or are you using different PC for Win10). And… you are using the same exact baud / bit settings between the two

Thanks Glenn for the suggestions, I will review them again. I have gone to the extreme and reinstalled Windows 10. Don't have much on that laptop. It's an Acer E5-523 AMD Windows 10 Home 64 bit OS.

Hi Adam, Yes… I have, with Win 10, Win 11, Linux, and MacOS. Since you have it working on Win 11, not to overly complicate this, but you must look at the device manager (and the hidden devices).

Is anyone using the CI-V interface cable with FTDI chip on Windows 10 with Icom 7000? My interface only works on Windows 11 but on Windows 10 the USB port is recognized but will not control the radio.

Thanks Steve. More haste less speed 73 Morrie

You can change the default offset frequencies for HF, 6M, VHF and UHF as described on page 63 (page 72 in PDF file) of the user manual under Repeater Operation.? You can't add additional offsets to

Hi All Is there a way to add extra (different frequency) offset to the drop down menu ? Thanks Morrie

I have a working FTDI USB serial cable plugged into a Windows 10 laptop here are I took some pictures of the device details. [ https://cloud.hamoperator.org/s/3f3QzsWwK885nQ4 |

Adam, I sent you a direct message to your gmail. To: "ic7000" <[email protected]> Sent: Monday, May 8, 2023 9:44:48 PM Subject: Re: [ic7000] ci-v usb not working on w10 but works on w11 Danny, My

Danny, My patience is waning now. Next to reinstalling Win10 in case there is something corrupt somewhere. I have CI-V using CH340 driver that I used till Windows decided to use only certified FTDI

Daniel, Thanks for the information. I have made only a few QSOs with the IC7000 on 144 MHz FT8 and none on 432 MHz. If I decided to return to those bands with FT8/MSK144 etc. study your information

Yes. But the frequency stability is not good enough for FT8-operation at 144 or 432 MHz. You should do the "fan mod", i.e. connecting the fan through 100 ohms to 13.8V so that it is running all the

I setup my kit and I was able to send an UnTUNE (turn off the external tuner) command to the radio with CI-V Scout. Here is a screenshot snip of the results;

I don't have much in a way of unused stuff. I have really nothing on the laptop other than some radio docs and couple of programs. I mainly use the 7000 along with this laptop when doing POTA while

Cheaper, definitely.

Pete, I have used my IC7000 for many years running WSJT-X in the FT8 mode and prior to that in the JT65 and JT9 modes without any issues. I run the IC7000 between 75 and 90 W for these modes. I use a

Thanks to you all for the advice on the icom 7000 and SDR.Believe the best option for me is to borrow an SDR radio for the field day effort.73KenKI7HER

Thanks Danny, that's a very useful tool and saves time. 73 Darrell AB2E ________________________________ Sent: Monday, May 8, 2023 12:04 PM To: ic7000 <[email protected]> Subject: Re: [ic7000] ci-v usb

I see there is an updated version. The author's web page is here. [ https://www.uwe-sieber.de/misc_tools_e.html | https://www.uwe-sieber.de/misc_tools_e.html ] Find "COM Name Arbiter Tool" on that

I use a DigiRig (v1.5) which has a Silicon Labs serial device. I have some FTDI USB Serial cables but none are CI-V wired. Perhaps related... I saw your com port is COM8 and it's possible that Windows