开云体育

Hi John It’s a matter of preference, i would risk saying that Iambic B is the only mode on the FT817 and also risk saying that it is the most common mode to be using a paddle. The main difference

As a long-term straight key operator trying to get to grips with iambic keying I would like to know whether the 817's internal keyer is mode A or mode B. Whichever it is, there isn't a choice, and I'm

Good morning to the group, take a look at the following site , brandonb.ca has an excellent tutorial on aprs using direwolf on raspberry Pi using the digirig. Vy73, Rick VE1RNM [email protected]>

Not specifically with APRS but with packet.? It was overdriving the input to the radio.? Need to cut the trace inside to reduce the audio. 73, Jeff, KA1DBE

That sounds like a really bad design. The cells do not stay matched and how do you match capacity? Any proper charger for multiple series LiIon cells needs a controller than measures each cell.

https://www.aliexpress.us/item/2251832432748054.html Or search for "aili 18650 powerbank". This is the kind that satisfies the requirements. I haven't tested it for EMI with my FT-817 yet. Using it as

Hello, Does anyone use the Digirig for APRS? How does it work? Daniel PY2TDB.

Hi Dick Thanks for help. I did some search over the internet, but didn't get across this page. One thing that didn't came across my mind yesterday, was that you can calculate new values by multiplying

I have a 12V 24 aH (13.8V 24,000 maH) LiFePo as the largest practical size pack. I have two sets of Anderson Power Poles for 12V gear and two 12V to USB-C plug 5V 3A step-down inverters (for raspberry

Also, note - the power bank you linked to claims 20,000 mA, but at what voltage? I suspect at 3.7 volts, the voltage of the internal cells - 20,000 mA at 3.7 volts will be closer to 5,000 - 6,000 mA

?I’d stick with a 12 volt lifepo4 battery and use converters to power/charge 5 volt usb devices. I recently added the Windcamp battery kit

The connected device controls the output voltage, you would use a cable configured to "tell" the power bank to supply it with 12v. I don't think anything 'guarantees' the power bank won't provide a

One more thing regarding USB-C: This power bank model ( https://http2.mlstatic.com/D_NQ_NP_2X_652620-MLA82216896700_022025-F.webp ) , for instance, states outputs of 5V/3A, 9V/3A, 12V/3A, 15V/3A,

*Good morning Everyone.,* *Looking for Dual Escort rails,* *to hold together 2 x Ft-817 radios.* *Do you have a set* *collecting dust?* *please contact me at my QRZ.com* *email

Hi Mike, Could it be that SPlit is enabled? Page 42 of the manual. Cheers, Steve VK2ARS Sent: Monday, March 17, 2025 3:25 AM To: [email protected] Subject: [ft817] I cannot turn off repeater shift

No, how do I do that? Please advise as you like. Mike M. Mike mcglashon AD9CA Email: <mailto:Michael.mcglashon@...> Michael.mcglashon@... Ph: 618 783 9331 From:

did you try a full reset?

I do not know if the display shows an “s”. I am blind and use a voice speaker. Please advise as you like. Mike M. Mike mcglashon AD9CA Email:

Hi Mike Does the display show an S? If so split operation is on as others have suggested. Andy

Hi is split mode on, Dave 2E0DMB [email protected]> wrote: