开云体育

Paul, 20 years ago when we were doing casework we bought a few drawers from Western Dovetail. They were good and the owner a character. He gave me a lot of good tips on building our own. Same thing,

I have a BF631 and bought my Mortiser and cart right from Felder in about 2014. Everything went together. I can take pictures and or measurements of anything you need. Kind regards, Brian D.

Good to know about Western dovetails. They are 60 miles from me. I’ll check if I can do a local pickup. Driving there will probably take less time than making them. What is their turnaround time?

Since in your original post you asked for points of view, then I’ll elaborate a bit more: I know you love to collect machines. I went through that phase as well: line boring, hinge-cup boring,

Ahh, now I understand. I have a CF-731 and the location of the bolt in the slot is the perfect height. Craig

David, Not planning on full scale anything!? Funny you call out Western dovetail as I am wearing their shirt right now!? I have ordered from them many times and they are the best outsourced drawer

Thank you Craig that's brilliant, I really appreciate you taking the time to measure everything. As for the height, I realise it can be adjusted, but the problem I have is that the top of the stand

Paul, are you planning to go into full scale cabinet production? At the end of my latest Fusion 360 video on the cabinet design project, I discuss outsourcing dovetail drawer boxes and who I use.

Good deal Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Saturday, March 22, 2025 6:35:42 PM To: [email protected] <[email protected]> Subject:

Well I just made some dovetails with the Northtech.? Looks like I will be keeping her.? It was dialed in for 16mm thick sides and fronts. Sorry to have wasted any of your time!? It took 5 seconds

Hi Davide, You can adjust the height of the mortiser on the stand with a bolt that goes through a slot in the back of the stand (see photo) Here are some photos of part 71 with the lever attached.

Imran, I've learned over time that play in the hood (or other devices where backlash play is an issue) is best handled by always engaging the the final movement "toward the action". On the F700, I

It is - took about a half a day to get it all set up, but I haven’t touched it since and now dovetails take me like no time whatsoever. The 650 is not automatic, though you just move with your

Michael, Those Omec's are really nice.? Is the build quality what they say it is? PK

Dear Felder friends, I have managed to get hold of nearly all the missing parts from Felder to revive the old 400-800 morticing unit and attach it to my beloved BF6-31, but it seems they no longer

Hi Bryce, My repeatability concern is not with hood being replaced rather with creeping on to the desired fence setting. Every time I lock down my hood, I push back first as it has play. My concern

Sorry an omec 650 Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Saturday, March 22, 2025 11:44:29 AM To: [email protected]

I finally broke down. I got a OMX 650 it’s not automatic, but it works really well. Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Saturday, March 22, 2025

If ROI isn’t an issue and you aren’t concerned about the maintenance on these machines I think it would be awesome to have one. But for me I’d have to be doing 100 plus boxes per month of

Now you can make 10 degree variable spaced through-dovetails, 3/8" and 3/4" box joints using PantoRouter with new ULTRA-SHEAR router bits made by Woodpeckers . It is faster and easier, the result is