Dear Felder friends,
?
I have managed to get hold of nearly all the missing parts from Felder to revive the old 400-800 morticing unit and attach it to my beloved BF6-31, but it seems they no longer stock one critical part, the rods that lock the morticer to the unit (part 71 on the attached numbered parts diagram for the series 7 machine, but same parts), and they are unable (or unwilling) to send me drawings or dimensions of these parts. I wonder if any of you have these locking rods connected to the locking handles, and whether you would be so kind as to take some photos and possibly measure some of the critical dimensions so that I can see if I can have them made at a local machine shop.
?
Another mystery I have not solved is that the stand (75) appears to be too tall to slide under the morticing unit when mounted, and hence is not helpful in moving it into place to attach to the machine. When next to the machine the rod 66 is supposed to line up with the upper hole in the morticer 4, but the stand 75 is higher than the rod and hence I cannot slide it into place no matter how I raise or lower the morticer relative to the stand. If anybody has any ideas I would be most grateful.?
?
Please note that the diagram they have sent me is for connecting to a series 7 machine, I attach the diagram for the series 6 machine but the individual parts are not all labelled on it so it is harder to explain the issues.
?
Thank you so much for your help!
?
Davide
