开云体育

I had an issue when I got my 2nd PP here in Arizona. The voltage being delivered to my house by the utility was too high. I was unable to alter the output of the PP unit. I had to add a buck/boost box

Hi John, First, I thought Felder spec was +/- 10% (207V - 253V). May be Felder spec is tighter for saws with PCS. My PP unit is very old and don’t recall it having the capability of changing the

My new saw is mis-behaving. The commissioning tech suggests changing the output voltage from my Phase Perfect to be closer to 230 v. Right now the display is showing voltages flickering around 240 to

Andrea, On the first point, as can be seen below, the DRO reduces travel towards the blade by less than 1/2” (12.7 mm) and if I duplicate the channel in the sacrificial splinter not at all. Imran

However, in my opinion (as a rule) the DRO should be on the left of the folding stop, to allow for cutting narrower pieces. Or, even better, if you make a rotating pin to mount under the DRO to allow

Hi Brett, Perhaps, I assume filament is available in any color user likes. Paint certainly exists. But not everyone’s mauve is same so there is that. Imran Malik

I'm gonna reply since everyone's thinking it anyway: Imran, mauve? Hehe. [email protected]> wrote: -- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO

I was just teasing you about the “beauty” thing, Imran. Your DRO holder is quite nice. -- John Hinman Boise ID Kappa 450X and A941

John, Sure thing. I am satisfied with this and when the Xcut one is painted, I would be equally satisfied. To each his/her own. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Beauty is in the eye of the beholder, Imran. I suppose plastic can be made to be attractive ;) -- John Hinman Boise ID Kappa 450X and A941

Hi John, If I could have bought a 3D printed holder for my rip fence and xcut fence for about $100, I would not have ventured in this direction. I also like things that look nice not that a wooden box

I designed and 3D printed a housing for the folks that wanted the Faima DRO unit on their rip fences. I guess I can supply those, It uses a couple of nuts to lock into the housing and a rubber o-ring

I used one of the inexpensive DRO (M503?) for my rip fence. I made a simple wooden box that the display slides into with a friction fit, and that attaches to the rip fence casting with magnets. The

Brian is right that my offering does not help with Felder flipstop issues. If that is your issue then you can purchase his DRO flipstop. I whacked my Felder flipstop with a dead blow hammer into

Thank you Imran. Yeah, it’s a bit odd that I can never open your links. But do appreciate you sending a copy. I’ll definitely take look. Wade

Brian, I’m looking for a DRO to install on the rip fence of the K700S. Something that sits on the main casting hub of the rip assembly. I have the heavy duty Felder flip stops with DRO already. Love

Wade, Not sure why it works for me, anyways, here is a copy. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

I have owned both the mirka 6” deros and 3x5 deos rectangle sander. Ended up selling both of them in favor of the Ekasand 3x4 and 6”. My main shop sander is now a 6” festool, the 6” Ekasand is

You guys do realize that Proscale or Imran's contraption do nothing to get rid of the crappy flipstop that Felder uses and isn't square. I am also not sure I would want to trust the flimsy 3D printed

Hi Imran, For some reason I cannot open the link. Wade