Re: Xcut DRO Update
¿ªÔÆÌåÓýBrian is right that my offering does not help with Felder flipstop issues. If that is your issue then you can purchase his DRO flipstop. I whacked my Felder flipstop with a dead blow hammer into submission - repeat at your own risk though. Anyhow, my reason for doing this is to offer a product at a very different price point so more users can take advantage of it. There is no free lunch, lower cost means that it would require some care. I believe it is fine for a hobby shop. Replacing damaged parts should not be an issue though. The biggest advantage of the DRO is quick adjustment and replication that is just not possible with OEM scale. Few days ago, I changed blades and cut a piece at 10¡± setting on DRO. The cut piece measured 10.023¡±. Moved the DRO 0.023¡± to the right and reset it. Done. Here is the actual 12¡± long test piece I cut afterwards. Obviously, this is possible with any DRO and I like having this ability, whether needed or not. Imran Malik On Dec 16, 2024, at 10:27?AM, Brian Lamb via groups.io <blamb11@...> wrote:
? You guys do realize that Proscale or Imran's contraption do nothing to get rid of the crappy flipstop that Felder uses and isn't square. I am also not sure I would want to trust the flimsy 3D printed brackets that I'm seeing here to hold the electronics. One good bump with a board will have the units in multiple pieces... of course if the STL is provided you can always print another, consider it a consumable. Brian Lamb blamb11@... lambtoolworks.com
On Sunday, December 15, 2024 at 06:27:50 PM MST, Tim Prinzing via groups.io <tim.prinzing@...> wrote:
I just went to the Proscale website and noticed this for Felder K700 with 1800mm crosscut fence: ? --Tim On Sun, Dec 15, 2024 at 5:36?PM Wade Dees via <wjdsignature=[email protected]> wrote:
|
imran