开云体育

John, I took David Best’s drawing to a local plastics shop who made me bar stock from left over cut off material. Is was inexpensive, 2 24” bars were about 20 bucks. I cut to length drill and tap

Nothing wrong with the Felder ones…. Brian Lamb blamb11@... www.lambtoolworks.com

Yes, you can use a flat bar. You will need multiple tapped holes if you want to fix it in place. Brian Lamb blamb11@... www.lambtoolworks.com

No commercially available t-nuts are going to fit. So make your own or buy Felder, which most likely won’t be a t-nut, it will be a flat bar with a threaded hole. Brian Lamb blamb11@...

Glen, Thank you for the info. They do look amazing. Does he have the market cornered on these, besides the ones Felder attempted? Wade

Wade, Mac's clamps are around 3k. I know it's a choker, but they are worth every penny and then some. It was my best investment to this day. So good I bought another set for the shaper. Glen Alpine

John, You can check your order list, my shoe was itemized on there as being included. Wade

Brian, So there’s no need to have a traditional shaped t-nut. Flat bar works fine? Is that even if you want to fix the nut in place? Thx, Wade

I did receive a ripping shoe with my K700S delivery, just last month. Are macs clamps really 3K? Thx, Wade

I’ve been hunting for T-slot nuts for the k700s and McMaster Carr, just emailed me a response that basically said they can’t help me. Strange, because I just watched a video where this person

So sorry Ed, already spoken for... Bill Bélanger eduard.nemirovsky@...> wrote:

Bill I will pay shipping for your ripping shoe. How much to zip 24445 Thank you, Ed wrote:

Thanks, guys! As an ultimate newbie I appreciate the help! Maybe my saw has a ripping shoe included. It is somewhere in PA right now, according to the trucking company, so I don’t actually know what

I agree with Brian. You can use UHMW polyethylene and insert a flanged nut into it (won't cut into or deform your aluminum), or in a pinch you can just use a bit of plywood and a T nut to match your

Keep the t-nut Dave Davies wrote:

I'd give the ripping shoe to anyone who will pay for the shipping. Bill Bélanger <david@...> wrote:

I use 1/2” x 1 1/4” flat bar stock and then drill and tap whatever thread you want in the middle. Brian Lamb blamb11@... www.lambtoolworks.com

Clamps are extra cost accessories. Buy the pneumatic clamps from Mac Campshure. https://mac-campshure.squarespace.com/ <https://mac-campshure.squarespace.com/> The ripping shoe should come with your

The price on the Felder store is for one nut. I've spent a good amount of time trying to find and off-the-shelf nut from McMaster and Grainger, and ordered a couple I thought might work. I've been

This issue about the overhead support arm bracket has come up several times here. I’ve pulled a tread from back in 2019 where a few of us noodled over the issue, and James Zhu posted photos of his