Re: Clamps and accessories
|
Keep the t-nut Dave Davies
On Wed, Feb 16, 2022 at 1:18 PM Bill Belanger < Bill@...> wrote: I'd give the ripping shoe to anyone who will pay for the shipping.
Bill B¨¦langer
Clamps are extra cost accessories.? Buy the pneumatic clamps from Mac Campshure. ?
The ripping shoe should come with your machine.? All three saws I¡¯ve purchased from Felder came with that attachment.? Now, it is possible they¡¯ve discontinued the practice to save costs.? Someone who has recently received a machine should comment. ? If you have a pair of pneumatic clamps, the ripping shoe will stay on the shelf collecting dust.
You won¡¯t find a commercially available T-nut that fits the Felder sliding table slot.? Mac Campshure provides them with his clamps, and I provide them with my short fence upgrade kits.? You can get the dimensions off this drawing: ?
What are you planning to use the T-nuts for?
I wonder if I missed getting necessary accessories, like clamps and a ripping shoe, when I ordered my saw. I¡¯ll chalk that up to not knowing much about the saw when I bought it.
I see that the Felder store is out of tee-nuts for the slider groove. They want $35, but it is not clear whether that is one nut or a handful. Any other sources for this sort of thing?
What are the dimensions of the tee-nuts? There is a wide variety of tee-nuts available through Grainger and Other industrial supply places, or I could have someone make a few for me, but I would have to know what dimensions to look for.
Thanks for any guidance!
--
John Hinman
Boise ID
Not a Felder Owner yet - expecting K700S in February and A941 in April 2022
-- Dave & Marie Davies
318-219-7868
|
