FS 2002 Full EuroVan Camper $20,000
Van is available in mid May, 2023.
We will deliver anywhere between Texas and Michigan.?
We are taking our last trip in our well-maintained 2002 full EuroVan Camper, so we are now selling our great
By
Malcolm Stebbins <mwstebbins@...>
·
#163816
·
|
Re: Weatherproof car cover
I¡¯d be happy to have it if you haven¡¯t yet found a home. I have a ¡®95 EVC and will be in the Bay Area this Friday. Perhaps I could pick it up, or if you prefer I can give you an address in
By
Jerome B Dwight
·
#163815
·
|
Re: Weatherproof car cover
Karey,
I am interested your extra Yakima roof racks.? More likely you can part them to someone much closer than shipping to Bellingham, WA.? We do have a close friend in San Franciso and we can pick
By
Jim 95 EVC
·
#163814
·
|
Re: Replacement fuel lines for 1997 EVC
I had some headmaster work done. Drove my '97 90 miles and smelled gas,? The injectors were going so I had all replaced. Thrilling to see you have been doing 90 minutes then see gasoline gushing
By
Chandler
·
#163813
·
|
Re: EVC Furnace Upgrade
I got mine at Home Depot.
By
Christopher Volk
·
#163812
·
|
Re: Replacement fuel lines for 1997 EVC
That's my initial inclination to be sure.
Has anyone else tackled this task?
Kris
By
Kris S. Seago
·
#163811
·
|
Re: Replacement fuel lines for 1997 EVC
Fabrication time
Buy a roll of high pressure fuel line from Napa and replace the leaky line
Stephen
By
Stephen Jackson
·
#163810
·
|
Replacement fuel lines for 1997 EVC
Howdy all,
My 1997 EVC started developing STRONG fuel odors in the cabin late last Fall. Life got busy and I parked it until I had time to devote to it. After a bit of exploratory surgery I located
By
Kris S. Seago
·
#163809
·
|
Re: Weatherproof car cover
?
Karey, If you still have the cover I¡¯d like it. I¡¯m in San Francisco and can pick it up. Also, I think you made the right move to a new vehicle. We¡¯re interested in how you like it. We park
By
george romero
·
#163808
·
|
Re: EVC Furnace Upgrade
Cross Fingers, and reading in other threads here that the Suburban NT-16 SQ (not the NT-16SE Direct Exchange) will take the place of the original NT-12. The size and specs appear to be correct for the
By
Jim 95 EVC
·
#163806
·
|
Re: Body work in Seattle area
Werner¡¯s Crash Shop has always been wonderful. Lower Queen Anne.
Jim- 94 Eurovan
By
Jim 95 EVC
·
#163805
·
|
Re: Body work in Seattle area
I did the same. Little odd driving without a windshield
Stephen
By
Stephen Jackson
·
#163804
·
|
Re: Body work in Seattle area
When I had my windshield replaced , ?safelite took mine out ?and I took it home and fixed the rust than made appointment to have windshield put in.
leo 1998
By
Wigen
·
#163803
·
|
Re: Body work in Seattle area
Steve Krival wrote:
I live in Minnesota, where we get a lot of rust from salty winter roads. As soon as there is a tiny chip in the paint, the salt gets in and starts working on the metal
By
Lee Hart
·
#163802
·
|
Re: Body work in Seattle area
I have the same question for the Mid Atlantic region (VA, WV, MD). Any
body shops there that you can recommend who would do that kind of work?
Thanks.
Wolfgang
By
Wolfgang Baudler
·
#163801
·
|
Re: Weatherproof car cover
Hi Karey,
I¡¯ll help you out with the cover. Im in San Francisco Bay Area (Los Altos) so I may even be able to pick it up.
Let me know
Thanks
Susie
Sent from my electric nail-gun
By
Susie Jensen
·
#163800
·
|
Re: Body work in Seattle area
I also have rust bubbles and live in Seattle. If you figure out a solution , let us know!.
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
Sent: Monday, March 27,
By
Steve Krival
·
#163799
·
|
Weatherproof car cover
Well, we finally made the leap to no longer owning a VW camper for the first time in my life. The latest, our 2002 EVC, 330K miles, never let us down, but we finally decided we needed to jump ship
By
Karey Krauter <kek@...>
·
#163798
·
|
Body work in Seattle area
Hello all,
I am trying to get the van ready for the up coming camping season.? We have an unrepairable ding in our windshield and will have to replace it.? We had a windshield replaced in the past
By
johnnystutsman@...
·
#163797
·
|
Re: Vss failing
Ah, that's the sensor you have to pull to check or fill the differential, I think.? I seem to remember some quirk about getting the connector off.? ?But an excellent opportunity to do that once in
By
Steve
·
#163796
·
|