开云体育

Thanks I got plenty of food for my thoughts! I wanted the ratflector for Emcomm. I did not wanted to bother any particular ratflector owner. I guess that as I try to be more proficient on Drats I ll

There is probably nothing that you can configure to on your router to make it work. Your ISP is what is blocking you from running a public ratflector. That is what I have been trying to get you to

Hopefully y'll can see this doc please comment on the ports setting WAN and LAN TNX NP3JD ________________________________ De: [email protected] <[email protected]> en nombre de John E. Malmberg

HI John Indeed the router’s wan IP I s not the same PC IP that can be found on whatismyip.com. I still scratching the babck omy head. I tried yesterday to set the ratflector on Hughes HT2010

I do not expect that to work. The settings have to changed at the NAT router that is in the telephone company's data center. I am assuming that means the Router's WAN IP address is not the same as

Change of router then is the COA. I ll be using a Hughes HT2010 Lets see If that Router can do the Trick WG9115AAC22-HS model . V/R NP3JD Sent from

Router’ s WAN IP address I no the same as PC IP address. I give up jajajajja NP3JD Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows Sent: Saturday, September 17, 2022

I am not setup for IPV6 to smoke test things at this time. The raflector may just work if you try to connect to it by its IPV6 address. 73, -John wb8tyw

Very important bit of information is still missing. What IP address does your router say is was assigned? If that address not 72.50.16.221, that means that you have two levels of NAT tra

HI Michael, when you sat that I m using the the LAN or wan address where exactly is that piece of info need to be placed? On the router , on the ratflector? Just in case this are the step that I

I think you are using your LAN IP address, not your WAN IP address. A LAN IP can be fixed (static) which only means when you reboot your router that device gets the same internal IP address. That has

Well I did as A Type I got? np3jd.ddns.net BUT I still can not access it, NP3JD

Hello John, Any thoughts on how much work it would be to make D-Rats be IPv6 compatible? IPv6 is clearly the future of the Internet, most ISPs support it now, and the ridiculous number of IPs you

All IPV4 addresses are now assigned. Because of that, many ISPs are now using private non-routable IP addresses to their customers. The is the case for Smart Phones that I have, the phone company

HI Glenn et Als. I jumped this morning to NOIP. It seems that the account was created succesfully. I m not using the rpi right now run some test, just in case I ve done something wrong on the static

Jose, Set it as DNS Host A. like mine here. This is for York Region Amateur Radio Club. Obviously as previously stated the IP address is likely to change at times. [image: image.png] 73, Mike

Good morning I have a question, on the NOIP create a hostname is asking me for the "Record Type" with 4 different option DNS Host A AAAA (ipv6) Dns Alias CNAME Web Direct Which one is the right choice

De NP3JD Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Thursday, September 15, 2022 5:46:27 PM To: [email protected] <[email protected]> Subject: Re: [d-rats]

I get it! I ll have to go the whole 9 yards with this ?. I ve been trying to get to my "ratflector" from another computer as quick as I turn on the ratflector. I create on the client a network

To get a ratflector onto the Internet, people need to be able to find your IP address or a URL that points to that IP address. I have been using NOIP.com for that purpose. Since most home Internet