开云体育

On the product page it says that the recommended resolution and maximum frame rate and resolution is 1280x720@15fps. [email protected]> wrote:

Can anyone tell me what the deal is with H.264 streaming for TSW-1052's.? Doesn't seem to work.? Trying to stream rtsp cameras to them unsuccessfully.? works with Ipad and newer touchpanels but

That does not look familiar. 2013, it may be Ed Mana or it was done in house @ Crestron. Do you have any more info on the system? Note, at one point they lost a number of projects off their server.

ClareVision may be. I haven't used them though.

have you tried Crestron Inside?

Check out Holovision Tim Riordan Riordan Brothers Integration Principal, CTS | Riordan Brothers Integration www.riordanbrothers.com ________________________________ Sent: Friday, July 9, 2021 11:38:40

Looking for a Doorbell that is an alternative to 2N and Doorbird. Client doesn't like the look of either, looks to commercial. Looking for something that is small, elegant and integrates well with

Thanks Crestron for not putting 4 series archives on the ftp site yet.? I was unable to download 2.4617.00032 from their website, it gets a 404 error.? Luckily, I had a copy of the firmware on one

Yea just the hassle of having to update all the old S+ modules. The main problem is that if you just compile your Simpl as normal you dont even know these S+ errors are happening! So you end up

Hi Peter, From memory all NSW count programs are very similar. The only different is the IP addresses in the program. If you can get the IP table from the Pro2 then you have a high chance to be able

Hey Phil, Thanks mate, I think it was Rutledge but they are no more (sold) and PRO2 only has the initials. MSKC I'll check with ELB as well Cheers Peter

Hi Pete, Probably Rutledge, maybe ELB... -- Cheers Phil

Thanks Lincoln! This seems to work #if_series2 { DoWork(); } #else { DoOtherWork(); } #endif

So I modify the module, for example CHANGE Volume_Min_Level { iSignedMin = Volume_Min_Level; iTempVolLimit = Volume_Min_Level; #IF_SERIES2 if((iTempVolLimit S>= (-100)) && (iTempVolLimit S< 12)) {

Not with Nexia but some other modules that predate the 4-series. It's pretty trivial to open the S+ and modify the directive accordingly. I'm on the Metro for the foreseeable future or Id quote it

"Logic excluded as a result of #if_series3 directive" Has anyone seen this error? Trying to use BiAmp Nexia 7.5.1 modules and am getting this error

Hi Steve, Interesting idea tat the remotes would get a signal from the GW, I'm not sure I buy that though - The whole thing seems weird, except for the fact that Crestron has not updated to fix this

While the HR-310 is a 1-way remote from the user's prospective, the Zigbee protocol is almost certainly not 1-way. From Wikipedia: "The Zigbee node at the lamp may constantly receive since it is

We have been told the Crestron module is in QE and could be out over the next couple months. Arnaud

Hi everyone, We had exactly the same issue the last couple months on a project. TB has asked to roll back the MC4s to 2.4617.00032, and the issue has been looking like fixed the last week-10 days or