开云体育

Brian, Very interesting!?!... This is a modified Adapt interface, however all the panels have the same project. I'll check but basically its the Home Page #1 with the Weather Widget as a Quick

Did you reconfigure the app to use SSL? By default the 3 series and earlier allow insecure/unencrypted connections (e.g. HTTP and CIP) while the 4-series forces security (e.g. HTTPS and SCIP) --

Hi All, I just converted CP3 file into CP4? keeping database updated and uploaded with same IP as before. Now Crestron go stopped communicating with CP4. Any suggestions please. Thanks,Kannan

Is your WAP on the control subnet? ?If not that’s likely your problem. ?If you move the WAP to the control subnet the connection will work. There’s a known issue with 3-series processors not

Hey Chris, By any chance, is this happening on panels that have multiple instances of the Smart Graphics Weather App? Like an Adapt panel modification. This happened after one of my awesome firmware

Update: * Finally got an AV4 with the newest firmware, tested with a CP4N side by side, no packet loss on AV4 for 2 days, and 2% packet loss on CP4N in 10 minutes. * So far there is no further update

Hi Joe, Thanks for the suggestion. I tried it and it didn't work for me (of course...) still 5 of 6 panels show 'please wait' the same panel still is working... Apparently I'm not a good enough

I've seen this same "waiting" message after more than one firmware upgrade on TSW-x60s over the last year, but the failure isn't repeatable.? I was able to get the weather app to connect after a

That is what I have seen over and over.

Thanks From: <[email protected]> on behalf of Philip Pennine <flippen9@...> Reply-To: <[email protected]> Date: Wednesday, June 30, 2021 at 8:49 AM To: <[email protected]> Subject: Re:

Anybody seeing continuing issues? I'm on site with (6) TSW-760 panels, v3.0.14 FW, project compiled with SG in march. weather app worked then, now 5 of 6 panels showing 'please wait...' again...

I just uploaded it to the FIles section ~phil

Yes the homekit is enable on the cp3n and i retrieved the home kit code as well.

Hi All; Anybody have a driver for this thing that would share it? TIA Kol

Do you have Homekit on, on the Crestron processor? I think you need to do it from console on 3 series now and there is a switch on the web portal on the 4 series.

All of the sACN projects I've done have used a node with a non-multicast address in the standard class C, B, or A IP address ranges. While the traffic may be sent multicast, the node you're

Were you able to pair the processor with home app? Mine is stuck on loading when i add an acessory. The app cant seem to locate the crestron bridge. I have been trying to control Apple TV through Siri

This is the document i have been following. https://www.crestron.com/getmedia/b11b4145-c0ad-4b43-841b-e85bc0b4b486/mg_pg_pairing_3-series_control_system_apple_homekit_technology Is there some other

IMHO it’s totally unreliable. I spent ages trying to get it to work then it fails. TB don’t really have a clue, so the general consensus is IR then CEC (depending on the setup). Many forums on FB

I'll shout for Caleb and ControlWorks as well!!? Love to work with them!!!