开云体育

Check here, then check back often: Microsoft Teams Rooms requirements - Microsoft Teams | | | | | | | | | | | Microsoft Teams Rooms requirements - Microsoft Teams Learn about the requirements for

I'm glad I could help, by accident!!...:) Yeah, I just happened to see the new device symbol one day - there's no discussion about it in the tech support camps... FTR, I have projects with both the Go

Port 22 is SSH. I am aware of (but have not personally implemented) ways to remap a Cisco device’s SSH daemon to listen on alternative ports but they all include blocking port 22 (typically the only

Forgot to mention that this is for a Teams Flex Integrator Kit, that's why I mentioned Microsoft in the OP.

Does Crestron (or Microsoft) have a list for recommended USB audio conferencing interfaces that work well with Crestrons Flex Integrator Kits? Thanks.

Hi All, I had to make a quick change to a TSW-1050 and TSW-750, after compiling the VT-Pro project and uploading it to the panels, they're now basically paperweights. They're so laggy that I can't use

Welp that was the problem still had the Crestron App symbol in there thanks for the reply, funny how I asked 2 true blue agents about this and this never came up.? Thanks

Same issue, also using a Mediaport 200. I believe I resolved the issue by dropping the bitrate to *300Mbps*. Very frustrating, and, frankly doesn't make any sense. I could use 2 of the 3 streams

Apparently it doesn't like switching modes and device IDs at the same time anymore. Sending them as two separate messages is working: {"Device":{"Usb":{"UsbPorts":[{"Mode":"Local"}]}}}

One of the possible ways to develop this method: 1. Creation of a precompiled or open source library (CODESYS library) for Xpanel standart protocol.?Third-party development can be difficult due to

In SMW, Are you using the GO device symbol or the older Crestron App device symbol??

Very Interesting! Thanks for the follow-up Steve!!

I tried using a USB hub during troubleshooting, but unfortunately it didn't fix anything.

Hello, Thought I would see if anyone has experience with these routers. Since the start of the DMPS line of presentation switchers I gave our network group two option for network configuration for our

Do you have a USB hub on either end? A very clever programmer friend of mine recommended this for 350's a while back when the USB side of the 350's was a bit shaky on the earlier FW. -s

Interesting, Phil. I wonder if this "very different" hardware is the root of some of the USB issues I have been encountering with a 360C routed to a 350. From a design and switch bandwidth

Hi there, does anyone know of either a Art-Net or Sacn simpl windows module that accepts/receives signal from a third system as well as output signal??? I know that there a sAcn module in for series

It turns out I had I updated the TSR-310 firmware from V1.003.0053 to v2.001.0078.001 about a week earlier.? I did that because I had several cases (including this client) where v1.003.0053 firmware

Hi What is the recommended full resolution to work worh for projects in Crestron Go for the following screens. A. iPhone XS Max B. iPhone 12 Pro What we have seen is the app doesn’t cover the full

Yes. I have reported this to TB for many projects in the wild and at my own home. It has gotten painful at times. I do believe there is something on the iOS side that disconnects the WIFI and