开云体育

I had a POST request that worked fine on 350s with firmware v3: post(tx.ip, '/Device/Usb', {Device: {Usb: {UsbPorts: [ {Mode: "Local"}, {UsbPairing: {Layer2: {RemoteDevices: {Id1: devID}}}} ]}}}); My

What is the "considered opinion" with respect to Wi-Fi connectivity within the Crestron Home/TSR-310 ecosystem.? Are/Do any of the MESH Network products provide stable connectivity and also function

Your URL format is correct.? I would try pulling the snapshot direct from one of the cameras if they're on the same VLAN as the NVR.? For them, you don't need to specify channel number. EX:

Try port 1516.

Yup I see the same. I thought it was my old Ipad Mini 2 though.

Has the Crestron Go app been Lagging for anyone lately?? When I first start the app you have to wait a bunch of seconds before you can do anything.? After that period seems to work fine but very

I have experienced same issue hit or miss loading directly to iPhone and iPads lately

Has anyone had success pulling "snapshot" images from IC Realtime NVRs? I'm trying to display them with Dynamic Graphics objects, but they don't work most of the time. Occasionally one of the images

Ah, I didn't see that you were talking about loading direct to the iPADs...sorry...

I am experiencing the same. Uploading directly to iPad is much faster, especially when testing UI development in-house. But now I find myself having to upload to the processor instead... another one

Their website has or had the protocol. I haven't touched one since my last post.

Samsung Be-70t ip control Full model number is lh70bethlgfxgo Has anyone controlled one of these sets? I am connecting on port 1515 and cannot get a connection -get a ?3 for status Is there any other

I'm working with a?HD-RX-410-C-E-SW4 for the first time. OOTB, they have no link local address. I connected to shop network to get IP address. When I received an address from our network's DHCP

Exactly my concern too... If only hikvision and dahua doorbells can send doorbell press notification, then it would have been easier. Anyone has module for hikvision or dahua door press notifications

Did you integrate that HikVision doorstation into a Crestron system or is it standalone?? If integrated, was it just a doorbell interrupt or full SIP calls?? ?I was looking at DB-KV8113-WME1 for

This issue is specifically for the use Local project option. I prefer to host on the processor and will use FTP for that. This project has to use Local.

Hikvision DS-HD1 https://us.hikvision.com/en/products/more-products/video-intercom/door-station/3-mp-outdoor-wi-fi-smart-doorbell-camera-ds-hd1

FTR, I never use the Toolbox Transfer Dialogs in VTP or SMW (Shouldn't matter but I just don't use it) For transferring iOS projects to the processor, I open Toolbox/Text Console and above, in the

That is good to know.? I agree on the number of error log notices.? Far too many and random.? Many are just laziness on Crestron's part not turning off debug notices in released code.? Very

3 new iPads, upload project after installing app & loads fine. Make change to project, upload again and the project will not transfer to any of the iPads. Restart the app and they present the