Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
volume feedback from pioneer elite VSX-91TXH
cheinemann605
I am having some trouble using the volume feedback from this receiver to drive a analog gauge. With other devices, I use a lookup table in the serial i/o to drive an analog initialize, and an analog scaler. But, this unit does not respond with vol xx. Instead this receiver feeds back with :
v o l x x each character is fed back with a carriage return after it. Is there some type of counter or accumulator that could take these numbers and combine them together into a single string?? I thought of using the numeric keypad, but once 2 bits are sent, then the keypad logic would have to be reset every time. My guess is that someone has had to deal with this issue before. |
|
Re: Relay Speaker Switching
Sorry I missed your reply, been away for a few days, thanks very much for the info, will wire it up and give it a go!!
toggle quoted message
Show quoted text
P --- In Crestron@..., Heath Volmer <hvolmer@...> wrote:
|
|
Re: Oppo BDP-103 no video
A couple of obvious things...
1) Make sure you're using one of the HDMI outputs on the Oppo, not the input. 2) Try both HDMI outputs on the Oppo - HDMI 2 has a less complex signal path and thus quicker HDMI handshakes. 3) Try the Oppo connected directly to a display, bypassing the HD-MD8x1 to rule out a defective Oppo. Geoff On Saturday, March 23, 2013, innoventgroup wrote: ** [Non-text portions of this message have been removed] |
|
Re: TSW series a lot to learn and ask...
Eric Williams
Lots of improvements. Now uses a TCP IP symbol for connection and won't throw any errors. Makes it easier to handle when and why it connects. Make sure to update the ra 2 firmware to the newest.
Eric Williams ABE Networks 240-604-4771 On Mar 23, 2013, at 1:04 PM, "Jesus @ Audio& Net Artist" <audioandnetartist@...> wrote: Did they released V5? I used last week V4 on RA2 modules, came out really [Non-text portions of this message have been removed] |
|
Re: On Site - AV2 not responding
I had a similar issue with a AV2 and the simpl+ modules that I was using from BSS would lock it every time. I could load the same program to a cp2e at work and it would work fine, both had v4.003 firmwares. That AV2 had v1 firmware when I got to it and I updated it to v4.003.
toggle quoted message
Show quoted text
They only way I could get the AV2 to come back to life was to connect to it 232 and hold software btn and press release HW btn and keep holding the software for about 10 seconds. Initialize and restore it from command prompt. I then had to change to older BSS modules and reload the program and all was good. I think crestron changed something from the the first generation of pro/av2's to the current and the first generation does not like the simpl+ --- In Crestron@..., "RobK" <fooguy89@...> wrote:
|
|
Re: On Site - AV2 not responding
What about text console and try init and reboot then reload current program?
On Mar 23, 2013, at 4:26 PM, "RobK" <fooguy89@...> wrote: Try booting up bypassing the program. You'd need to recompile the program that's in there (I thought they got erased on that major of an upgrade but maybe not) with the latest simpl + include4_2series.dat (in the latest database). [Non-text portions of this message have been removed] |
|
Re: OT: what to do with TiVo Series 1 box?
Heather Baiman
I just brought my useless ReplayTV to Best Buy two weeks ago, they have recycling programs. Just need to check their website for your area.
________________________________________ From: Crestron@... [Crestron@...] on behalf of RobK [fooguy89@...] Sent: Saturday, March 23, 2013 4:30 PM To: Crestron@... Subject: [Crestron] Re: OT: what to do with TiVo Series 1 box? I sympathize with OP, I hate throwing out what was once useful and I see it as still maybe useful. It was painful when I upgraded my Replay series 5000 boxes to Tivo Series 3 HD's... I kept them for a while thinking someone might want them, but couldn't find anyone. Went to the dump. At least OP was able to transfer his license out. Rather than put it curbside, I'd at bring it to your town's local recycling center, most towns seem to have some kind of "e-waste" container these days. If not, find a friend who has one and get him to toss it. If you really want to try to get rid of it, try freecycle or Craiglist. --- In Crestron@..., "martinkup90" <martin@...> wrote:
------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links |
|
Re: OT: what to do with TiVo Series 1 box?
I sympathize with OP, I hate throwing out what was once useful and I see it as still maybe useful. It was painful when I upgraded my Replay series 5000 boxes to Tivo Series 3 HD's... I kept them for a while thinking someone might want them, but couldn't find anyone. Went to the dump. At least OP was able to transfer his license out.
toggle quoted message
Show quoted text
Rather than put it curbside, I'd at bring it to your town's local recycling center, most towns seem to have some kind of "e-waste" container these days. If not, find a friend who has one and get him to toss it. If you really want to try to get rid of it, try freecycle or Craiglist. --- In Crestron@..., "martinkup90" <martin@...> wrote:
|
|
Re: On Site - AV2 not responding
Try booting up bypassing the program. You'd need to recompile the program that's in there (I thought they got erased on that major of an upgrade but maybe not) with the latest simpl + include4_2series.dat (in the latest database).
toggle quoted message
Show quoted text
Program by pass = tap HW-R, then hold SW-R until you see the "bypassing program!" come up in the serial console (or just wait like a minute) PS: since you have a serial console did you see ANYTHING after a HW-R...? --- In Crestron@..., "coolaiddrinker" <coolaiddrinker@...> wrote:
|
|
Re: On Site - AV2 not responding
Also, I have tried HW-R about 2 -3 times with no success.
toggle quoted message
Show quoted text
--- In Crestron@..., "coolaiddrinker" <coolaiddrinker@...> wrote:
|
|
On Site - AV2 not responding
Hi Guys,
I am currently on a site where I tried to load a new project in AV2 that had firm rev 3.137 and system kept rebooting itself. So I performed SW-R to bypass the program and then upgraded the firmware to v4.003 but now i can't connect to the processor at all. The update was done through serial cable and trying to connect to it via serial as well. When attempting to connect to processor, i get a warning in toolbox saying "the ability requested (code = productverfiypresence) is not supported on the device. Any suggestions? TIA |
|
Re: OT: what to do with TiVo Series 1 box?
How about using it as a chair warmer?
toggle quoted message
Show quoted text
--- In Crestron@..., Geoffrey Reynolds <greynlds@...> wrote:
|
|
Re: serial text truncated in Debugger
if you mean the parameters at the bottom of the touchpanel symbol its 255d. Regardless I should see the whole string in debugger if all is well correct?
toggle quoted message
Show quoted text
--- In Crestron@..., mpninc <mpninc@...> wrote:
|
|
Re: OT: what to do with TiVo Series 1 box?
The door stop option sounds like the best use for those at this point :).
Geoff On Sat, Mar 23, 2013 at 2:45 PM, Tony Golden <mrgolden@...> wrote: ** [Non-text portions of this message have been removed] |
|
Re: TPMC-4XG
Marc Nield
I have had this sort of thing with one of these but it always seems to come back to life eventually. I think the last time I connected to it via USB, reloaded the firmware, reloaded the program and it worked. There was no science to it though.
toggle quoted message
Show quoted text
On 23 Mar 2013, at 14:40, MoskmaN <moskmanz@...> wrote:
you changed the router? the tpmc only see wifi G and B |
|
Re: OT: what to do with TiVo Series 1 box?
That's a good question, Joe. I actually have one Series 1 box and two Series
toggle quoted message
Show quoted text
2's sitting in my garage, that I've also been hesitant to just "throw away". A quick Google search didn't really turn up any great ideas... --- On Saturday, March 23, 2013 at 12:36 PM, Joseph Vossen wrote: |
|
Re: serial text truncated in Debugger
Check what your panel is set at. 聽I had the same issue.
toggle quoted message
Show quoted text
Sent from my Galaxy S庐III -------- Original message --------
From: af8567 <af8567@...> Date: 03/23/2013 9:52 AM (GMT-08:00) To: Crestron@... Subject: [Crestron] serial text truncated in Debugger This has happened on the last 2 devices I was playing with (iport and mirage server) where the serial text is truncated to 11 and 5 characters respectively in debugger. There's no logic in between the modules and the panel to screw anything up. Its a direct connection. The metadata of the playing media is always truncated. Two completely separate projects, tried MSP and characters set to 255d. Any ideas? Thanks in advance. CP3 with a 1050 [Non-text portions of this message have been removed] |
|
serial text truncated in Debugger
This has happened on the last 2 devices I was playing with (iport and mirage server) where the serial text is truncated to 11 and 5 characters respectively in debugger. There's no logic in between the modules and the panel to screw anything up. Its a direct connection. The metadata of the playing media is always truncated. Two completely separate projects, tried MSP and characters set to 255d. Any ideas? Thanks in advance.
CP3 with a 1050 |
to navigate to use esc to dismiss