Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
Re: serial text truncated in Debugger
if you mean the parameters at the bottom of the touchpanel symbol its 255d. Regardless I should see the whole string in debugger if all is well correct?
toggle quoted message
Show quoted text
--- In Crestron@..., mpninc <mpninc@...> wrote:
|
|
Re: OT: what to do with TiVo Series 1 box?
The door stop option sounds like the best use for those at this point :).
Geoff On Sat, Mar 23, 2013 at 2:45 PM, Tony Golden <mrgolden@...> wrote: ** [Non-text portions of this message have been removed] |
|
Re: TPMC-4XG
Marc Nield
I have had this sort of thing with one of these but it always seems to come back to life eventually. I think the last time I connected to it via USB, reloaded the firmware, reloaded the program and it worked. There was no science to it though.
toggle quoted message
Show quoted text
On 23 Mar 2013, at 14:40, MoskmaN <moskmanz@...> wrote:
you changed the router? the tpmc only see wifi G and B |
|
Re: OT: what to do with TiVo Series 1 box?
That's a good question, Joe. I actually have one Series 1 box and two Series
toggle quoted message
Show quoted text
2's sitting in my garage, that I've also been hesitant to just "throw away". A quick Google search didn't really turn up any great ideas... --- On Saturday, March 23, 2013 at 12:36 PM, Joseph Vossen wrote: |
|
Re: serial text truncated in Debugger
Check what your panel is set at. 聽I had the same issue.
toggle quoted message
Show quoted text
Sent from my Galaxy S庐III -------- Original message --------
From: af8567 <af8567@...> Date: 03/23/2013 9:52 AM (GMT-08:00) To: Crestron@... Subject: [Crestron] serial text truncated in Debugger This has happened on the last 2 devices I was playing with (iport and mirage server) where the serial text is truncated to 11 and 5 characters respectively in debugger. There's no logic in between the modules and the panel to screw anything up. Its a direct connection. The metadata of the playing media is always truncated. Two completely separate projects, tried MSP and characters set to 255d. Any ideas? Thanks in advance. CP3 with a 1050 [Non-text portions of this message have been removed] |
|
serial text truncated in Debugger
This has happened on the last 2 devices I was playing with (iport and mirage server) where the serial text is truncated to 11 and 5 characters respectively in debugger. There's no logic in between the modules and the panel to screw anything up. Its a direct connection. The metadata of the playing media is always truncated. Two completely separate projects, tried MSP and characters set to 255d. Any ideas? Thanks in advance.
CP3 with a 1050 |
|
OT: what to do with TiVo Series 1 box?
Joseph Vossen
I'm cleaning out a closet and came across a TiVo Series 1; I boxed it up and transferred the license when I replaced it with a TiVo HD. I hate to throw out useful electronics, does anyone have any ideas on what I can use this thing for other than a boat anchor and/or door stop? I'm open to pretty much anything that is fun and (somewhat) useful.
thanks |
|
Re: TPMC-4XG
innoventgroup
As a matter of fact, that is the exact model I went to. So far they seem to be working just fine. The only issue I have with them is that they tend to create errors no matter how close you have them to the transmitter. They don't crash the system, they just create errors. Something in the handshake is not completing. Hope this helps.
toggle quoted message
Show quoted text
Have fun, DAVE --- In Crestron@..., "rlf79cm" <rlf79cm@...> wrote:
|
|
Re: TPMC-4XG
Thanks Dave, I suspected that would be the case when I logged into the Crestron website and say "Discontinued" in big red letters.
toggle quoted message
Show quoted text
Thinking of switching too MLX-3 panels anyway, for battery life and wireless reliability reasons mainly, any experience with them? Cheers, Rick --- In Crestron@..., "innoventgroup" <innoventgroup@...> wrote:
|
|
Re: TPMC-4XG
Thanks Dave, I suspected that would be the case when I logged into the Crestron website and say "Discontinued" in big red letters.
toggle quoted message
Show quoted text
Thinking of switching too MLX-3 panels anyway, for battery life and wireless reliability reasons mainly, any experience with them? Cheers, Rick --- In Crestron@..., "innoventgroup" <innoventgroup@...> wrote:
|
|
Re: TPMC-4XG
innoventgroup
Unfortunately, I don't have a fix for this. I just took 2 4X's out of service due to a continual problem just like this one. I also had problems with the 4X's locking up the system as a result of their WiFi cards locking up. I could always get it back by rebooting the 4X but a customer is only going to put up with it for so long. I am telling you this so that you don't waste too much time on them. There is a reason that Crestron dropped them. Just FYI.
toggle quoted message
Show quoted text
DAVE --- In Crestron@..., "rlf79cm" <rlf79cm@...> wrote:
|
|
Re: TPMC-4XG
Exact same router I've been using for the last 12 months! It can't see any wireless network at all, so I assume the wifi card is knackered.. back to Crestron it goes :o(
toggle quoted message
Show quoted text
--- In Crestron@..., "MoskmaN" <moskmanz@...> wrote:
|
|
Re: TPMC-4XG
you changed the router? the tpmc only see wifi G and B
_____ De: Crestron@... [mailto:Crestron@...] En nombre de rlf79cm Enviado el: s谩bado, 23 de marzo de 2013 10:03 Para: Crestron@... Asunto: [Crestron] TPMC-4XG Had a TPMC-4XG running fine for about a year, no problems at all, but as of today it won't connect to the WAP and the "Scan" option under the setup/wifi access point settings isn't showing a single wireless network (there are a lot in my area) and 0% Anybody seen this before? Faulty network card in the panel maybe? Cheers [Non-text portions of this message have been removed] |
|
TPMC-4XG
Had a TPMC-4XG running fine for about a year, no problems at all, but as of today it won't connect to the WAP and the "Scan" option under the setup/wifi access point settings isn't showing a single wireless network (there are a lot in my area) and 0%
Anybody seen this before? Faulty network card in the panel maybe? Cheers |
|
Re: ONVIF IP Camera Control command format help
maheksamani
model number is :PBACM - PT300
--- In Crestron@..., "Bryan" <bmorris.gm@...> wrote: the camera type is since we are more likely to have specific modules thanthe generic protocol.Behalf Of maheksamaniCamera with ONVIF protocol.the camera moves. |
|
Re: TSW series a lot to learn and ask...
Eric Williams
You mentioned radio Ra 2. Make sure you go to the resi.lutron.com/radiora2 site and download the new R05 version of the modules. Its the older stuff will completely fill your cp3 with errors and dump feedback.
toggle quoted message
Show quoted text
-----Original Message-----
From: "Jesus @ Audio& Net Artist" <audioandnetartist@...> Sent: 鈥�3/鈥�22/鈥�2013 1:50 PM To: "Yahoo Crestron Group" <Crestron@...> Subject: Re: [Crestron] TSW series a lot to learn and ask... I just spent couple of dead hours figuring out, between Core 3 Stuff and the Greta Ipad example, getting the idea how can i merge both, but I ended up just checking out and whatnot... My impression was: I do TPS as Main Page and activities> A/V Distribution with a bar for sources on top below status bar. follow by button bar with rooms and volume at side. so selecting room then Source brings the sub page of that source and volume. trying adapt this environmental to core 3 and new Ipad layout with the rotation example That somehow i cannot see the rotation manager on my definition of Mobile device on SIMPL. I decided not to pay that much attention to example cause i dont then to code that way and its just an example with bunch of "Main" Pages. but what to do when you have 30 Light loads? put 4 loads per subpage and keep fliping? I need to bang my head in this.... *Jesus Tossas* * * *Technology Architect, Audio Engineer, Programmer* * * *787-460-1223* * * Contact Info <> [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
|
Re: Crestron RJ11 Cables
You really need to use the 6P6C connector and six conductors. The single
toggle quoted message
Show quoted text
conductor in a 4P can't carry the load for some devices. That said, I just make my own. You can buy the crimping tool from Radio Shack which will do 6P and 8P ( part # 279-405) and the connectors in bulk from Lowes or Home Depot for short money. It's not rocket science and in fact quite simple to do. After you've done a few, you can make a cable in a couple of minutes. The connectors are clear and the flat cable wires are color coded so you can check your work with ease. In a message dated 3/22/2013 10:31:52 P.M. Eastern Daylight Time,
stever101010@... writes: 6 pin is a RJ12.... but some solutions are...... a Crestron CN-RJ11, a 4 conductor(RJ11) phone cable will work since pins 1,2 and 5,6 are tied together(use CNRJ11 manual for pinout) although the connection seating can be funky sometime, or a Crestron C2N-HBLOCK. Why oh why didn't the ST series of control gadgets ever go to phoenix connectors? Who has the answer? ________________________________ From: trayschaeffer <_trayschaeffer@... (mailto:trayschaeffer@...) > To: _Crestron@... (mailto:Crestron@...) Sent: Friday, March 22, 2013 10:16 PM Subject: RE: [Crestron] Crestron RJ11 Cables If I remember correctly, these are RJ-12. Don't know of another source for cables. Tray Sent from my Samsung Galaxy Note鈩�, an AT&T LTE smartphoneDavid Peddicord <_dpeddicord2@... (mailto:dpeddicord2@...) > wrote: Hello. I've purchased some older Creston pieces that use RJ11 connections. I cannot seem to find 6 conductor RJ11 patch cables. Do you have to make these or is there a source for them other than Crestron. Thanks in advance. Dave [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ * **** Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. * ****Yahoo! Groups Links [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
|
Re: infinetex diagnostic tool not connecting
It did eventually connect after a number of ties..
toggle quoted message
Show quoted text
What in the world is going on with this tool... --- In Crestron@..., "xymox1357" <public2@...> wrote:
|
|
Re: Brand Spankin New Processor with Program Loaded - WTF?
Dustin
I too have seen this many times. My personal favorite was an old Essentials class program running complete with web xpanel. It was from "Joe's Laptop" and Joe needed practice.
toggle quoted message
Show quoted text
I would agree that if its working fine then what's the harm, however I usually do a couple things when this happens. 1) make sure the physical serial matches what's on the box / packing list. That's how they track when you bought it and thus the warranty period. I have found them not to match on previously opened product, so had I found issue later who knows what the warranty status would've been according to their system. If thats off, swap it or the confusion will never get sorted out. 2) if the serial is correct, call your rep and / or call / email tb about it. Indicate you'll keep it for now, but at least get it documented. (Either emails from the rep or a ticket number from tb). This will buy you extra leeway on the advanced replacement timeframe. At the first sign of hardware trouble, they'll swap no questions asked. --- In Crestron@..., "jcdigitalmethod" <j.j.cunningham@...> wrote:
|
to navigate to use esc to dismiss