Re: NVX programming jump start
Use DIR for this - the firmware updates are much easier with DIR compared to using NVX tool.? The new dashboard that was introduced in v4 essentially replaces all of the functions in NVX tool and
By
Patrick Barron
·
#256380
·
|
Re: Crestron Home RAVA issues
Interesting...I do have an AV3 here. I wonder if I could do some console command tomfoolery to create my own ringtone. Depends on if the -R panels will accept it ot not...
By
MQSACK
·
#256379
·
|
Re: Barco CTRL
FYI with new API ( update ) not release yet, you can publish compositions from other user to the walls. If someone wants to team up i can send the new API/ update
By
yoanmanuel02@...
·
#256378
·
|
Re: Barco CTRL
Man !! Im on the same situation and i need to publish compositions to the wall. Please if you find anything let me know. i got the API but i dont have time to create a module.
By
yoanmanuel02@...
·
#256377
·
|
Re: Crestron Home RAVA issues
SIPDEFAULTRING OFF sent via console will stop the factory ring tone. Not sure how or if you could use a different one with Home. In Simpl I just drive another softer, less grating ring tone in VTP
By
j5races
·
#256376
·
|
Re: Home compatible security system recommendations?
Okay what am I missing....
I think I'm with Andrew M on this.
For the Past 10 years, We have used DSC with all our Crestron Integrations (SMPL & Home) up until 1 year ago when they stopped making the
By
CO Cowboy
·
#256375
·
|
Re: Crestron Home RAVA issues
Jumping back in here.
Chad is this a workaround to shorten the Rava ring time when 2N initiates a call and also to have flexible video switching capabilities.
The 2 requests my client has is:
1.
By
MQSACK
·
#256374
·
|
Sonos Network Issues
Wondering if anyone has had issues with Sonos devices all dropping offline after a reboot? We have a rather large network and Sonos devices are on two switches in two separated racks connected over
By
Marty@...
·
#256373
·
|
Re: Q: How to: Construct - open a touchpanel project as an XPanel
THANKS for sharing!!!
By
EQ
·
#256372
·
|
Re: Private jet systems??
Michael this is great advice and exactly what I needed, thank you.
For everyone else chiming in, this is an existing system that has been in place for several years, I'm not doing any physical work
By
Gary Miller
·
#256371
·
|
Re: Private jet systems??
I have done a substantial amount of design/programming/consulting for an aircraft -- not a Gulfstream but a MD-10.
Beware that anything that directly connects to the aircraft electronics or
By
Lincoln King-Cliby
·
#256370
·
|
Re: Home compatible security system recommendations?
Yes, that's what I've been using. TL280 with IP comms.
By
David Chramcow
·
#256369
·
|
Re: Home compatible security system recommendations?
Hi David,
Are you referring to the Neo panels, with the TL280(R)(E) TCP/IP communication module? In the documentation Crestron says they support the Neo panels, but then only mention setup with
By
Jessie Whiteman
·
#256368
·
|
Re: Private jet systems??
Ok, so a company I have ownership in, owns and flies an Embraer private
jet. I sometimes fly the airplane, as I have a commercial pilot
certificate and have earned the type rating to fly in the right
By
Michael Caldwell-Waller
·
#256367
·
|
Re: Private jet systems??
Not to rain on your parade but before you even consider touching that jet, realize that the liability is absolutely insane. ?Nearly every single thing in that plane is regulated and or will require
By
AVMaster
·
#256366
·
|
Private jet systems??
Has anyone here done any work in a Gulfstream private jet? If so do you know if there's a way to control the onboard video switching and amplifier source selection?
By
Gary Miller
·
#256365
·
|
Re: Home compatible security system recommendations?
Following
By
John Gabler
·
#256364
·
|
Re: NVX programming jump start
If you go to the Files section of this group, and search for "liquidpixel" you'll find our free resources for programming NVX systems. Might be a helpful start for you. It shows you how to handle all
By
josh@LiquidPixel
·
#256363
·
|
Re: NVX programming jump start
One thing about the DM NVX Tool that's nice is you can do batch firmware updates (as long as the batch is the same model).? So you could use it to "discover" all your 350s, and tell it to push the
By
Gas Bandit
·
#256362
·
|
Re: NVX programming jump start
Does the firmware updater tool step thru revisions automatically or does it just jump them up to latest? I have a few sites that have been chugging along for years using very early firmware and one of
By
@johnmax
·
#256361
·
|