开云体育

In the file names, yes. Never been a problem before but you raise a good point. I'll check that out tomorrow.

Running signals through a buffer like that is usually done for troubleshooting purposes because it gives you more control over when signals go high in Debugger. Typically, Biamp works best when it

What if the original programmer already has a digital signal for "Initialize"?? Should I go ahead and use that signal rather than a 1?? He has it in a buffer with the digital signal for Is

Awesome.? Thanks again.

Do you have a working module?

Just curious are you using actual SPACES in your path? Not sure if an issue but did you try it without spaces?

It's an either-or situation - if you're wired to the Tesira by serial port, you'll use the RS-232 control processor module, but if you're connecting by LAN, you'd use the IP control processor module.

Thanks Gas Bandit.? I wonder if having an IP module vs the RS232 module makes any difference as far as making it easier to point to the Tesira?? In my case there is only 1 Tesira in the system, and

I did ask this on the Crestron Discussions forum, but it seems to take days to get a response there. So posting here in the hope that you guys can help out. On a TSW panel, I can send an image to the

And yet the CP3 port (and if memory serves me correctly the PRO2 port) talks correctly... They're all using MAX485 chips (or similar) afaik. I'm wondering if the issue is the timing of the DE/!RE

You might need to get an oscilloscope out and compare the Tx vs Rx levels. If Tx is working, then the only thing I can think of is it is something to do with the levels. I suspect the Mipro gear,

Yours is a very common story. The earlier modules were victim of the newtonsoft json deprecation. You don't need an analog init for the new modules, you just need a separate command processor module

Thanks Gary, I have a couple of that type of adapter from different sources here in Oz (and China) and they seem to transmit but I cannot get them to receive (or at least give me a recognisable

Looks like they are releasing a new one and disco-ing the DIN-DALI2 FYI https://www.crestron.com/Products/Lighting-and-Environment/Integrated-Lighting-Systems/Accessories/DIN-DLI

I have a program that needs the Biamp Tesira v1.7 modules updated to v3.3, but they aren't like for like.? The v3.3 modules all have an Integer_Parameter called "Command_Processor_ID", and the old

Hi Tony; They describe the mysterious adapter, which appears to be simply a 232 to 485 adapter, along with other info that might be pertinent. It seems if one has a 485 com port available an adapter

I have always used this adapter https://amzn.eu/d/0EBAHiu never failed me yet although some RS232 levels aren’t full +15v -15v so you may need to add an external power supply to it. That could also

im crestron programming beginner, din dali2 is using for a project.in ( http://project.in/ ) din dali2 lifud light driver is not showing up on commissioning tool.its support only DT8 protocol.how to

Hi All, I have a DMPS3-300-C that I want to talk to a Mipro wireless receiver using RS485. I *have* done this with a CP3 (native RS485) and so I know that my code and wiring works. What I cannot get

If you want there to be a "default" source when it powers up, what I'd suggest is add the Offline extender to the device in SIMPL, run that "device offline" signal through a not, then run offline.not