开云体育

Never mind.? It's been powered down for over a month.? Powered it back up today to fiddle with it and it came on normally.? There was no image as it powered up showing no input selected. Selecting

In order for it to respond after a power outage or reboot, I have to physically press the "route" button on the front panel.? Then it will respond to commands remotely.

Exactly what Jason said. I tried this experiment before, not with NVX, but just generic 2-way communication from Extron to 'whatever'. I was told, 3 times, by Extron, that if there isn't a driver for

Well, that's an interesting idea.? I guess this also makes sense for this application, since I am trying to simulate basic matrix switcher functions via NVX.? That will also simplify my approach to

Any time I've had to communicate between GCP and Crestron I've found it's better to use a known GCP driver rather than the generic, as the generic doesn't allow 2 way communication. Typically I use an

earlier this week, I was starting to prepare to just swap out the IPCP 550 with a Crestron CP3.? ?But I had some trouble with feeling comfortable controlling the XTP Crosspoint 16x16, and that space

I ended up going with an RMC3 being a middle man. I hooked up the IPCP 550 and RMC3 via RS232 and used the universal projector rs232 bidirectional driver. It seems that the RMC3 isn't at all picky

Thanks for all of this input.? I ended up using the director for this project, but I think at some point I will probably get rid of it.? When my building expansion occurs, we will be adding a whole

Thanks for the reply, but I'm not sure how that might be helpful for my specific question. I'm not trying to integrate with Compool, which that site appears to document. There's already a Crestron

I would have agreed that Director saves time setting up and updating NVX's originally, but since the release of the NVXTool, most of the needed setup functionality that made the Director worthwhile

CP4 running SIMPL.? Not Crestron Home.

Steve, was that with a CH or custom system?

Not only does the CP4 loses connection to the Sonos intermittently, but I had a case recently where the Crestron Sonos module was? causing the TSR-310 remote to intermittently stop responding.? The

Tony, If you are going to try to control the Pentair EasyTouch directly, you don't need an adapter. The Pentair bus is just RS485. The other day I connected a din-ap3 to a EasyTouch to test control.

https://carlstrom.com/pool/compool/ <https://carlstrom.com/pool/compool/> may be helpful

I know this is an old thread, but I have a client that wants to integrate their Pentair EasyTouch pool controller.? Although I suggested they upgrade to an IntelliCenter, of course they don't want to

Nope, there's absolutely no reason to spend the frankly exorbitant expense of a DIR when you can literally handle every necessary function (besides firmware updates, which are simple enough just with

Marty, Not offering any help but this topic has been beaten to death. Sonos and Crestron will never work well together. And yes Sonos falls offline ALL THE TIME.

Gas Bandit ( /g/crestron/topic/112007146?p=Created,,,20,2,0,0::recentpostdate,,,20,2,0,0 ) Mar 31 #256351 ( /g/crestron/message/256351 ) Edited (

What are you talking about?? The DIR is like magic.? Who told you they were useless?? You should update firmware on endpoints to current - period.? Don't try to use old firmware on NVX.? DIR DOES