开云体育

I've had good experience with the BiAmp. If you go that direction I'd start by looking at the Nexias. They have several variations depending on what you're doing. Are you just looking for program

Hey guys and gals!!! Would anyone happen to have an ir driver for the vizio "M" series tv's?? Thaks in advance!!!

"Press and hold is a pulse on held output..." Pulse is only on the "Not Held" output. The held output follows the input state after the appropriate delay. Looks like it fits the OPs need, and without

We are thinking of switching from the Clearone 880 DSP to BIAMP. Any suggestions on which model to go with for general university classrooms?

Can anyone send me the 850 software/template? My URC account is not letting me in, and I'm on crunch-time with another job. Guy is heading to the site in a while and he might get bit by the main page

Not on press and hold v1.2 Press and Hold v1.2 The Press And Hold module provides functionality useful in many applications. It allows a single button press to perform two distinct actions based on

Press and hold is a pulse on held output... My impression is that he wants it high as long as it's held after the delay, but to then follow the state of the input signal.

Send the template file first in the mx-850 editors then the the vtp file. This will make the main buttons work

Hi all, Can someone explain why a (or several) DMPS units may respond to a ping on the 2nd IP Address (Video Board?) and not the 1st (CPU)? I'm using SoftPerfect Network Scanner (netscan) to verify

IIRC the issue with the main pages not working has to do with the default behaviour on the MX-850 being press and hold to execute commands on the first page, while a quick press just page flips to the

I tried this years ago. The method I heard of was to plug in an ML600, let Toolbox recognize it and then swap out the MX850 before you load it. If I remember correctly, everything worked except the

Flash. Basically the absolute minimum size is ~15 MB which means that most of the 2-series controllers without expandable memory are out of the running to host the project. -- Lincoln King-Cliby, CTS,

Just curious, why would it be a pain in the ass? Just make a home page with 2 lines "TV" and "PROJECTOR". Both would jump to the same source selection page. Then in simpl use buffers or xpoints to

I know how to do these the "traditional" way but did I imagine that we can somehow use an ML600 file on the device directly? Just curious. Heath

I don't remember what I was trying to do - just have all of the theme icons available for use in CF or something... Proved to be a big hassle.

Simple 1 page project with three subpages is 15meg--there is not enough memory on the dmps to serve it up. Of coarse I am using as local file but if thier ipad walks or takes a dive? I wanted to have

I can dig that. It does make more sense for integration into the existing data network to explain that it uses common protocols than proprietary voodoo.

Had something similar a while back, from memory I found that copying the module files into the project folder fixed the issue at the time. Seemed to be a path issue of some sort that fixed itself

Yes, you can setup SSH on the processor, and then it requires login credentials to access. Be forwarned, the last time I used it, it was a little buggy at times. Not the SSH in general, but the

Is anyone else experiencing issues with the updates microsoft has been pushing down and Crestron applications?