开云体育

You can enable authentication on the processor, and have multiple usernames/passwords, that are required for login over SSH. The real benefit to me is bringing Crestron in line with pretty much every

I think for now, it's just the encrypted connection... Which doesn't mean a whole lot for now because we still don't have a password for SSH access...Therefore, who gives a shit if you're sending

Just did a job with an SX80. Wish I would have read this thread before quoting the programming! v1.0 of the module is indeed a mess. Known issues: directory dialing can only dial using "method 1". If

H.264 support for the Crestron App has been included since the 1.03.39 update in July. To the OP: There have been some issues with H.264 authentication support that supposedly will be fixed in the

?SmartFTP is another one (not free) that fits our needs well. You can send a single file to multiple devices with one click. You can also save your destinations for future use. You don't even have

Directory Opus is a great software, you're one of the first people besides myself that I've heard using it. I had used that program going all the way back to their Amiga days, and then on the PC up to

The NP-PA500 has the Crestron Connected module in it will communicate "natively" with the processor over IP.

Perhaps its a scaling or offset issue? I am hoping to look at my system either tomorrow or perhaps next week. When I confirm what the "actual" lamp hours are on the devices vs what the module is

Are you using MJPEG or H.264? H.264 is supported on TSW panels but not on the iPad App.

I unsuccessfully tried the same. The C20 is cisco's "portable" system and ir was the most reliable way to control it. I usually suggest the C40 if given the opportunity just because of the control

I have recently observed the same thing on several different systems using different projectors (not all NEC projectors but all Crestron modules). I haven't figured it out. I even have one doing it

After having some more time to work with this system, now the communication to the projectors appear to be solid. However when using the NP2000 module, it appears that the lamp hours are not correct.

it's my first time to use the mlx-3 remote. the home theater i'm programming consist of: 2 displays -TV -Projector with a motorized screen that goes down in front of the TV. 2 sources -popcorn hour

I wasn't aware the front USB ever worked on any firmware version. The problem is you can't set the IP address from the front panel. I told Crestron about this since they first shipped. When you set

I have a tsw-750 that perfectly streams an IP cam, but my iPad running Crestron App can't seem to stream the same video. Nothing appears. I just used same logic.

Sure you can ftp over mobile projects - at least for edits. I'm not sure if they have fixed the issue of no manifest.xml (?) created when you first FTP over a mobile project. [Crestron]

We do a lot of mobile projects and you cannot ftp transfer those projects. On larger files loading those projects can take 8-10mins, using SSH those transfer complete in roughly 1 min. Thanks, Owain

One thing about the beta Toolbox is that it unzips the .spz on the computer side and sends multiple files; sending via FTP unzips on the processor side, which (IMHO) saves time on the computer,

I was having some strange problems that I though had to do with my programming / interaction between the different programs in the 3 series. Turns out it had to do with some horribly wrong behavior of

I tried to control a C20 TC4.2.1 yesterday with the Y cable and was totally unsuccesfull. Not sure what went wrong. CP2E processor.. think it will have to be IR control.. pins 2-3-5 to processor