开云体育

What's the easiest way to get a digital pulse when an analog value changes?

Add a analog buffer between the an_act of the touch panel and the analog input of the Vantage module. The enable of this abuf his driven by the press digital join of the slider. That way, when you

Debounce adds a delay in each direction, low to high, and high to low.

debounce? 2014-09-27 18:41 GMT-05:00 astingen@... [Crestron] < Crestron@...>:

Does anyone have IR codes for either a Sony STR-K700 home theater receiver or a Westinghouse TX-42F430S LCD TV? They are both older devices. Thanks. Drew

Does the program have the same signal name on the touchpanel definition for an_act<join> and an_fb<join> where the slider analog joins are tied? If not, can you open the vantage module and see if

I'm unloading a bunch of crestron product from my showroom. If any one is interested let me know. We are in northern NJ and local pickup is best at least for the heavy stuff. 1)Procise Processor PSPHD

I've had nothing but problems controlling the new line of Samsung LED TV's via the EX-link from a DM-RMC100-C. The TV's RS232 will lock up and stop communicating and the only way to fix it is to power

We're working on a take over job that has a Vantage Infusion system in it. The client wants control of all the Vantage lighting. We're using the AVPA Infusion 1.1 modules to talk to the Vantage

Yeah, tell me about it... We have recently been troubleshooting timing issues with the soft phone control. If I'd been able to properly emulate that it would have just worked the first time... I get

Hi All, My company is looking for a certified Crestron/AMX programmer with 3+ experiences to join our programming team. They would be based out of our corporate headquarters in New Jersey. It's a

The emulator is nice. It's my experience that it cannot emulate a telephone connection, or at least won't respond quite like a real, live phone line would (can't see hook status changes and the

Greetings all, I am currently working on a two room system, each room has a DMPS-100-C. These two rooms are part of a larger system that is being powered by a CP3N/DGE2. The client has expressed an

I'll just add that I like the BSS London DSPs much better than the Biamp Nexia/Audia stuff I've worked with. The new Biamp products look much nicer and based on the impressions from the previous posts

The protocol documentation isn't great, but it more than makes up for it by allowing you to Emulate a project and test without the actual hardware present. Crestron@...> wrote: -- Jeremy

The best logic is whatever makes sense to your end user... The canonical digital solution: Interlock for your source (assuming you select that first), one buffer for each destination (assuming you

StartFileOperations() is what I was after.

What's your actual question? If you're trying to ask how to link the processors together You could turn the Rack2 into a Cresnet slave with the AV3 as the master. The other option is to use a COM port

hi guys, thanks for the reply but if only av2 has ethernet card and rack doesn't how will i do it? Thanks, Kenneth

I just ran into this same issue. (See my thread from a few weeks ago) I usually start with an Xpanel then save as to the other panels. I now only reference that Xpanel in my simple program no matter