开云体育

This is exactly the type of info these geezer was looking for.. That and the Super Secret Bible of Console commands..

I use mostly 4k monitors and Simpl+ editor just hates it. That’s why I switched to VScode. I use Eric’s version. You select the processor version you want to compile and use the keyboard shortcut

I need to crack that open and stop avoiding it.. Will VS do direct builds of Simpl+, I was working with an older 2002 module but on a 4k 43" mon Simple+ editor font was tiny..

Or you could VScode and have a lot more flexibility.

Here's an event scheduler I made that might be helpful for what you trying to do. https://drive.google.com/drive/folders/1TaUTB6LLVhrzBQsLrlp9pb_eI1HZv9XA?usp=sharing

Ok I have not dug into what file defines the Font, Font Size and colors; the Preferences have next to nothing. Is my Option to use NotePad++ then reopen and compile in Simpl+ or is there a bat or

just drop in and define the Crestron Event Scheduler v2 and connect the needed signals.. Does not really mater if it is a xPanel or touch panel. Its pretty basic and pre-baked.

Hey John, I deal mostly with the VPL ES home cinema line, but knowing Sony the protocol may be the same... Here's some details for a project I just did with a 715ES. If you need the module I can send

I have found the easiest way with 3 of my Mitsubishi mini splits, is to install the Mitsubishi PAC-US445CN-1 interface to the CN5 connector on the mini split, then connect a Crestron thermostat (CHV

Take a look at Ultamation's SIMPL HOME

I have tried both PJ Talk and Crestron Connected and can not get control of this PJ.? Logged into the web interface and made sure the settings were correct.? Am I missing something?

The one issue that I *think* you may have with GC in this conversion application (if it works) is that you would likely loose the ability to P+H on commands, like Ch+/-, Guide Up/Dn, etc....

Agree with the cresnet question, cause you could use the C2N-RTHS https://www.crestron.com/Products/Lighting-Environment/Climate-Control/Thermostat-Accessories/C2N-RTHS. Nate

Hi Everyone, Is anyone used TCP/IP for controlling a Sony BDP-S3700? Need communication and API command for Sony BDP-S3700. Thanks, Arvind

Here is what my xpanel i like to show https://ibb.co/c8WbSMq ( https://ibb.co/c8WbSMq )

Hi All, I am struggling with creating an xpanel and simpl programming. I am trying to create an xpanel which allow to select a date and start and finish time of an event i.e. sensory event in this

Cresnet not an option?

Hello, I am looking for a temperature sensor recommendations to read the rack temperature which can be connected to the IO port of the CP4. Thanks in advance. Jomy

Do each head has different camera ID as well? 81 for head 1 and 82 for head 2? So? two instances of the same module with different ID's for saving and recalling the presets for each of the two

You can control either of the heads individually.? Their visca protocol is documented in the manual and one particular byte determines which camera the command is for. I've not used the crestron