开云体育

I ordered and installed a 4GB memory card because that's what the manual says it's max is.? The little tiny test program loads just fine as expected but the single page smart graphics project still

Thank You, Will send it to Bacnet guy, will let you know how it works.

Dave, Will this fix the 2-series issue, or the scheduler/Data File issue (Which I think may still be present)??

Please refer to the information I provided in this previous thread: /g/crestron/topic/105182704#msg253096 /g/crestron/topic/101801674 (

Please refer to the information I provided in this previous thread: /g/crestron/topic/105182704#msg253096 /g/crestron/topic/101801674 (

Try to grab the image here: https://vayumetrics.egnyte.com/dl/TSNYJ1aXiO

Updating this with the fix. This ended up being a heat issue. The hotter the processor got, the quicker the router would fail. Cooling it down has solved the issue.

There's nobody left there that even worked on that project...

Sure, Crestron is committed to supporting D3 moving forward....hahahahaha

I worked with a Jace contractor on a similar problem site and this is what he did on his end to get rid of a lot of the timeout failures on the Crestron side... Maybe it will help...

SwitchBot has been busy this spring releasing a number of new smart home products.? The latest is the SwitchBot Universal Remote.? This hand-held remote control can control TVs, air conditioners,

Hello Eric, Can you please elaborate into this matter, i am getting same error in Crestron side. TIA

Yea we append the filename with "Modified By xxx" so we know, and referencing the original version reminds us what module we modified.

I hit this issue a few weeks ago. The solution for me was to re-add all the keypads which forced D3 to use the latest db version. Depending on how many KPs you have I realise this may be a total PITA.

This is a known DB issue.? I don't recall the rev you need to rollback to, but a rollback is the "fix".? I am waiting for the fix as well, huge PITA.

Thank you John, I will certainly give this guy a try on my next visit!

I have been having this issue with D3 snd all projects for several months. Its to the point that I have a D3 laptop with older firmware that I need to carry with me, and another that has the latest DB

Back story.? I have an existing D3 system with Horizon 1 keypads.? Everything would build and compile fine until I updated to the latest DB release.? I can't confirm, but I think that the latest

Well damn, theres my learned something new for the day, lol.? That's actually really helpful too.

Thanks for all the replies! Just to note: I did notice that I have it to scale, but then noticed that it IS already sized to my TSW-1070 (1920x1200) and looks fine there. At least we can 'arrow'