开云体育

Hello Juan, Everything is done with http requests using the documented API. You have to login first to get a session Id. This session id has to be stored in the module memory. You have to use it as

I actually spent some time on this Mitsubishi HVAC this evening.? I got an ESP32 Arduino to talk to it.? It acted as a UDP Server, and upon UDPSending it text like "ON" or "HEAT" or "72" (a

Borg Hive Mind: Has anyone successfully accessed an RTSP stream from behind the control subnet thru the Network Port of a 3 and 4 series processor? Please weigh in. MM

Is this the one that has the giant IR remote with an LCD screen and 30 buttons under a cover? If it's expandable via BACnet, that probably works great -- I'm more familiar with the IR side and will

Hi David Cool Automation has a way to control HVAC systems in CH. also airzone- aidoo have a great communication way to control under CH and if there are no many hvac zones in the place, it may be

As MGmail says, it depends on what the form-factor is. Either way, you should look at https://coolautomation.com/. they have integration devices for Mitsu and other Mini-Split systems. I only deal

If it is the ventless system. Best way is BACnet. No idea if CH does that. The mits unit require their own temp sensor to be connected or they won't run. You can read the temp from them but I usually

What is the best way (if any) to control a Mitsubishi Mini Split HVAC system using Crestron Home OS4? The house is being renovated and there are no tstats in place yet. Can we use any of the Crestron

Hi Jay, To the best of my knowledge the Bond bridge integration works fine but I don't personally use it on a daily basis so, without testing, I don't know if something has popped up. I'm traveling

Hello everyone, Has anyone controlled a Magewell USB Fusion? I?m fighting with it and? i?m not sure how to connect to it be able to make input changes. Any help will be greatly appreciated. Thank

The fact that you can just drop in an Autonomics hardware definition just like a touch panel tells me everything. I am not joking when I say for six months the Sonos did not work for more than 3 days

Jay, Have you experienced any problems with your Bond integration? My Bond bridge pro updated FW to 4.4.7.1 and now I get this message: 06:47:07 - 05-06-2024 ? ?Bond-Get_Devices_List - Error

The USB-C cable usually isn't directional but the cable and connector supports a whole lot of "features" that appear to be getting in the way.? I have some USB-C serial devices that won't work on Mac

I am trying to connect a external USB capture card to a Mac with only USB C ports on the rear.? The card is powered by the USB port.? The device came with a straight USB cable but I had 2 USB to C

I would defer to Furman support, but I would think its not an issue. I don't use Furman personally. Keep us posted...

FYI there is no such thing as a 5 or a 6 way circuit, you only have single, 3 and 4 way. On a 4 way circuit, both end switches will be 3 way switches and everything between with be a 4 way. If you

Hi Chris! Thanks for the reply. ?I suppose the Furman 1500 UPS is as good for a Crestron Pro4 as it is for my Trinnov 32... ?I also have 2 Furman Elite 20's, in place and although off topic a bit

I agree with CO Cowboy. Autonomics is a great industry partner (opposite to Sonos...). Their integration is solid. Using the MPO is quite good, and you still have the ability to completely roll your

Okay now this is getting even more odd. I love the autonomics, even more than sonos. If I had my way, I would put an autonomics in every job. Okay, okay... We have had our share of failed soundcards.

I’m having exactly the same issue. It’d be great if the guys at LLC could chime in and hopefully steer us in the right direction to solve this issue thanks a lot in advance