Re: Mitsubishi mini split and Crestron Home
|
Hi David Cool Automation has a way to control HVAC systems in CH. also airzone- aidoo have a great communication way to control under CH and if there are no many hvac zones in the place, it may be cost less than the coolmasternet from cool automation.?
eitherway, it is a good idea to double check with both of them to validate compatibility with your systems..
also, you have the last option with sensibo if the splits can't "talk" with those two brands and you can still do IR control
have a great one nf
As MGmail says, it depends on what the form-factor is.
Either way, you should look at . they have integration devices for Mitsu and other Mini-Split systems. I only deal with Custom/SMW systems, but I'm sure that they are working in CH as well...
If this is an actual "standard Mini-Split" with a wall/ceiling mount head unit (the standard old-school, ugly wall unit type), CoolAuto will work without any additional Mitsu stuff.
If it is a "Ducted Mini-Split" where you have 'traditional' air ducts, etc. this format will require a temp sensor, etc.
>>> I just resolved an issue with a Mitsu Ducted unit and the best solution was to use one of Mitsu's TStats with thier remote temp sensor, then we used the CoolAuto unit to integrate with Crestron...
>>> There is also a way to use a 'Standard' TStat like a CHV or Horizon unit with the ducted style, but you'll need an appropriate Mitsu interface module (You'll have to research that one...)
|
nicofreda