开云体育

Is it HDMI video and USB touch out? You can run it into a DGE-100

Hi, Does anyone know if it's possible to use a Logitech Tap with a Crestron Processor? The customer has a DMPS3-350 with quite a few sources and wants a Logitech Tap as his touch panel with a Room

Haven’t tested myself, but this Roland scaler looks promising. Supports a lot of high refresh rates. https://proav.roland.com/global/products/vc-100uhd/

A Barco imagePRO-4K would take a 120Hz input. But when converting to 60Hz , it will just skip frames, no interpolation done. ...high frame rate in general, 120Hz is recently used in the professional

Hi, a client wants to change three TS-1542 wall mounted panels into table top panels. According to my sales rep, there?s no specific table top kit available for the TS-1542. So i?m asking the group

No just "half way around the nation", how about half way around the world!

Hmm check with rgb spectrum

Stupid question. If your output is 60, why have the source at 120 or 240 ? To do what your saying correctly is quite complex and lossy. Lets say something only shows up in one of those 240 frames. IE

Yo, Crestron!, what is with Masters 2022 not having a virtual option at least? Not everyone has the luxury of extra money to blow to fly and stay in some place half way around the nation! ?Obviously

FYI, The Touch panels have sold - But I still have the Wall-Smart if interested...

So I'm having the same issues as the OP getting commands to work on a Tascam BD-MP4K, and the protocol guide for the BD-MP1 was helpful...to an extent. I've loaded the commands in the guide, and I can

UC will turn off display based on Windows settings. Make sure you have the HDMI EDID pass throughs installed. wrote:

Download and run the PowerShell MTR remediate script will fix that issue.

Hey all, Just like the title says. I need to take a 240hz 1080p signal and drop it down to a 60hz 1080p signal over HDMI. This is for an eSports setup. I *may* be able to get away with 120hz on the

Yes, we have essentially removed the Cisco touch screen entirely.? We are using the Crestron screens exclusively with all the required functionality per customer needs.

I have never tried using a apple or Android based tablet for a crestron? interface but would like to give it a shot.? Curious if there's a primer someplace to help get me started Thanks Chip

ah yes that was my issue, I forgot all about the feedback required to make it stick, thanks.

Do you have the analog inputs and outputs tied together in SIMPL? ?IIRC that is required for it to operate correctly.

The " hue saturation" and "lightness slider" of the color picker widget both snap to zero after about a second of selecting a color. This makes it difficult to get an actual color, because the

*It maybe more secure and easier to connect via a vpn you setup in the UDM-Pro?*