开云体育

Thanks Ryan I’m very familiar with RoomMe. But it requires the person to carry their smart phone so it doesn’t work for this application Thanks again Jay <rpc78crestronio@...>

I saw this at Cedia a couple years ago. I know that typically it is mounted on the ceiling, but maybe it would work for your application. https://www.intellithings.net/ Ryan Cunningham

Hi I'm looking for a battery operated sensor that will be triggered when someone is standing within ~1 foot of the sensor.? A normal motion sensor won't work for this application because it will

Not sure that it's fair to say the official module is unstable as it is currently running without issue in numerous systems. If you have any specific problems with the module, please reach out to us

Just to be clear, the 4-series processors are much faster (and truly multithreaded which can open its own set of challenges for ‘bad’ programming)… but the speed of the CPU/RAM/etc. in the

came across this item this morning.? not sure of its viability or reliability. https://www.biamp.com/products/product-families/commercial-audio/usb-switch#usb-200

eagrubbs could you please upload it here , or if you can send it to me too , the module is too bad , and considered unstable ( /g/crestron/profile/2076327 )

I had the same problem. I was forced to change the edid on the dmps input to 1080p. Default edid was 4k. Thanks, Ephrain

Hi, we’ve seen the snow effect with non crestron kit with when switching between multiple sources. ?Deselection and re selection of sources always fixed the problem. Not ideal… In the end we

Hey gents, I've just been struggling with this issue myself and managed to get the V5.0 to ramp volume if I latch the "Initialize" input high as well as the "Poll Enable"

We are experiencing an issue with HDCP and a very specific setup. We have a small form-factor PC connected to a Crestron HD-DA2-4K-E. Output 1 of the DA goes to a DMPS3-4K-150-C, output 2 of the DA

Qsc cameras with a USB io bridge seems to work well. And a core110f obviously...

Cannot say I've notice any issue trying to open multiple instances of SIMPL -- even with the version of SIMPL that came out last month.? But instead of double clicking the SIMPL file to open it, I

Boy, do I agree with this!!? A Total PITA!!? none of my other programs do this...:(

Chris, When I start programming, I instinctively start 3 instances of Simpl Windows. One is for my main program, and the other 2 for auxiliary programs or module edits. What is a PITA for me is that

I have never heard that advice and virtually always launch SIMPL via the file (double clicking the SMW, using the arrow keys to highlight the SMW and pressing enter, or using the “Open SMW”

Hi All, In the long-past, I would routinely open projects by 2x-clicking the .smw project file, which would start a new instance of SMW and open the project together. At some point in the last few

I have used Icron Raven USB 3.0 extenders and most recently the Inogeni Toggle USB 3.0 switcher which has RS-232 control. USB 3.0 switching and extending still seem relatively new so there are not a

Try configuring in Studio or using Engraver

I can help with that, drop a line or call 828-506-1584 Thanks