开云体育

3-Series processor by any chance? I've seen similar with an MC-3 but haven't had time to chase it up with TB. I triggered the recall from a stepper instead. Cheers Phil

If this display is getting controlled by a app through ios. Then it is accepting the commands over LAN, so it can be controlled by crestron over LAN. Regards Mayank 9892553421 Sent from BlackBerry?

We have a panasonic display which can be controlled with a Panasonic Remote TV2 App on ios. Can this Display be controlled with Crestron on IP or CEC. Any help would be greatly appreciated. Thanks

Hello, I have the following queries on Qube Server. a. Can they be integrated with Crestron. b. If yes, is there a module available that someone would share or available at a price. c. Is there any

has anyone tried using PTZ on HIKVISION Cameras? how were you able to control PTZ? sorry newbie on Cameras here. still starting to install and integrate them in CRESTRON systems. thanks.

I meant to say that a class A address with a /16 mask has the possibility of 256 subnets, with each subnet having 65534 host addresses available. Crestron@...> wrote:

Cygwin > MBP wrote:

Its one subnet with that number of hosts (although I thought there were more that disappeared but that may be with other masks...) Heath

Would someone care to explain to a rather-tired me who should call it off for the day: If an INIT driven by 1 will cause a Change to fire in S+, why won't an ARAM with its select and recall driven by

With the possibility of 256 different subnets and 2^16 - 2 hosts. Been studying for my CCNA. Crestron@...> wrote:

Yep. That's a single 10.100.0.0/16 subnet.

They aren't actually different subnets - with a subnet mask of 255.255.0.0, and a first two octets of 10.100. it's a single subnet that ranges from [roughly] 10.100.0.0 to 10.100.255.255 Lincoln --

I can no longer get Simpl Windows to open. I have uninstalled and reinstalled several times using several different methods. I ran System Mechanic which supposedly found a bunch of Registry problems

They are on different subnet but they see each other due to the mask set to 255.255.0.0 The default gateway are set to 10.100.0.1 on the processor port0 and on the videoboard port0. The videoboard

There are several ways you could accomplish that depending on the network configuration and topology. The two obvious methods to me would be: 1. VLAN tagging by MAC at the switch 2. setting each NIC

How do you manage to put the processor and video board on different subnets, while they are on the same physical port? From: "Rapha?l Thiffault raphaelthiffault@... [Crestron]"

Awesome. Thanks Neil.

Yep, Works like any other 2 series eslave. Crestron@...> wrote:

I have a super "thrifty" client who is unfortunately looking at getting an aurora system. I'm trying to see if I can get close to his budget with crestron at all. Has anyone slaved a QM-RMC to another

Was not able to get 1080i signal to pass through a DM8X8 4k system to the new Samsung 75" TV. After testing everything for hours the solution was to use the HDMI 3 input on the Samsung. It worked