开云体育

my values are generated with an INIT, and can range from -2d to 32d. I just gave it some more thought, and I'm thinking I can compare my value to 32,768, instead of zero, and when my value is > 32,768

Where are you getting the values from, self generated or from a device/feedback? And what is the range of values you're comparing?

I was trying to use everyone's favorite symbol, Analog Comparison (Full Set), to tell me when an analog signal was either positive, negative, or zero, but then I realized it is treating analogs as

Or you can use an abuf driven by the digital press join of the slider.

I have a client who would like us to install a simple multi-zone music/intercom system in a guest house. He is looking for: 2-4 sources, where one of the sources is an iPod 4-6 zones includes an

A cable with different connectors on either end cannot be considered "straight through". :) - Chip

I've got the same error if creating a new project and save in the default location called "projects" folder where is in server. No problem if I change it to "Public Projects" where is in C drive.

It's very easy to setup, and I've done it dozens of times. If you need to see a live example of the code let me know and i'll get you something. Regards, Cody

I just fixed this issue today. Here is what I did. Analog equate driven off econnect room id that triggers an abuf for each room that sets tp's analog fb to vol out of that room. I have 3 sets of

I attempted this several times and I still can't come up with a viable solution. I am going to do my best to explain this and if anyone wants to help it would be appreciated. I want to use a slider

Hi After eventually seeing green ticks next to all my equipment Including idoc :) i decided to try and upload And then...... An error occurred while synchronising Details... Type mismatch What does

I'm not sure why everyone is having such trouble with Grace. When I asked, I got a message with attachments including the IR protocol and IP control info. Sure - it's UPnP, but they shared it freely.

Got ya, thanks!

Near camera will be selected whenever you are on camera 1 or 2, Video inputs down below what input you select drives the traffic of control. Put signals on it, watch it in debugger. From:

Literally Right now am fitting sub pages into a 6L from a 4SMD cause the company sold 2 Idocs in a project... -- *Jesus Tossas* * * *Technology Architect, Audio Engineer, Programmer* * *

I'm with you there...

Basically, the above. We've taken over an old analog distribution system, and recently replaced an old Fujitsu plasma w/ a large Samsung LED unit. No problem while on component distribution. We were

Honestly I hate to code Idocs...

Do you mean select near end camera to control camera 1, and then select near end camera again, and it toggles to camera 2 control?

Yep when you select the camera on the module it directs the command to the second camera. Done it bunch of times From: avsystemdesign <avsystemdesign@...<mailto:avsystemdesign@...>>