Near camera will be selected whenever you are on camera 1 or 2,
Video inputs down below what input you select drives the traffic of control.
Put signals on it, watch it in debugger.
From: avsystemdesign <avsystemdesign@...<mailto:avsystemdesign@...>>
Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Date: Wednesday, May 1, 2013 4:39 PM
To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>>
Subject: [Crestron] Re: Polycom HDX 8000 (2 x Camera Control)
Do you mean select near end camera to control camera 1, and then select near end camera again, and it toggles to camera 2 control?
--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, Seth Olle <seth@...> wrote:
Yep when you select the camera on the module it directs the command to the second camera.
Done it bunch of times
From: avsystemdesign <avsystemdesign@...<mailto:avsystemdesign@...>>
Reply-To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron@...<mailto:Crestron%40yahoogroups.com>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron@...<mailto:Crestron%40yahoogroups.com>>>
Date: Wednesday, May 1, 2013 4:29 PM
To: "Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron@...<mailto:Crestron%40yahoogroups.com>>" <Crestron@...<mailto:Crestron%40yahoogroups.com><mailto:Crestron@...<mailto:Crestron%40yahoogroups.com>>>
Subject: [Crestron] Polycom HDX 8000 (2 x Camera Control)
I am looking at the Polycom HDX 9000 v3.3.3 Crestron module, and not exactly sure how a person would control two Polycom Eagle Eye cameras connected up to the Codec?! Two local cameras that is.
Has anyone done this before, am I missing something really simple here?
Any help would be much appreciated.
