开云体育

Not sure you need a full blown confidentiality notice here on a public forum dude. ;)

Ooo...Glad you told me. That's a rough one, but I get it... Thanks as always Caleb, And everyone for chiming in!!!

I don’t actually know the answer to that. My guess – and when I guess I’m normally wrong 110% of the time: is yes there is an internal computed ramping level, and it probably varies to some

So Caleb, do you think that there's not an actual 'ramping load' in the processing? just sampling? Or do you mean by 'Sampling', just a few stepped representation of the levels?

I would say avlinkpro Michael Restrepo | Owner Restrepo Innovations 825 Windham Court North Wyckoff, NJ 07481 Office | 201.925.0059 Direct | 201.952.4624 Email | mike@... Elite Pro

PRESETV sends RCB’s. Use a RIN symbol and you can tell if the signal has a RCB. What you are seeing in debugger is just a sampling. Caleb Radecky | Manager, Online Products & Services Crestron

Great responses. It's definitely getting my mind spinning! It's good to know about the 'SLEW', I have used it many times in the past... The problem with symbols like the slew is the hard-coded

Old School is underrated...

Hi Josh, Have you finally done the trick between the TSW-1060 and the HIKVision door station? Was it hard to set up? Is a third party server needed? Regards, Seb

I believe that Alfred makes a smart mortise lock.? Alfred locks have an optional Zigbee, Z-Wave, or Wi-Fi module.? I recently reviewed one of their other locks and used their Z-Wave module, a

Hello, just wondering if anyone has a recommendation for a controllable mortise lock with a keypad. Unfortunately, it needs to be a wireless solution similar to the Crestron/Yale deadbolt locks. The

While you can't create an RCB, passing an analog through a SLEW symbol will generate them. That's the old school way to have a ramping signal on one processor control a dimmer on a different processor

I tried the "rtsp_tcp=yes" and did not work for me, and i also have the same issue with the Previews on CH

Yeah, I got it, though anything is possible nowadays. I wanted to define what I did with my tests... Hoping others will Post their RSSI, LQI and network details for comparison...

I'm pretty sure that was a joke, Chris ?

Powered by a USB-C charger normally (Which the new horizontal base does not include!...:(? ) My last posted tests were using my laptop USB-C port to power the charging base, as I held the remote up

-39db RSSI especially for 5GHz is near perfect in my eyes. I don't know about LQI. Did support ask you by chance if the TSR is properly grounded?

Is there a chance to have a snapshot of a video source and make it the priority output of the decoder?? or any ideas? I see that the simpl symbols of any decoder (nvx) has a digital signal

Just in case you’re like me and did not know how to run WifiDiag… Using Toolbox Console connected to the TSR over Wifi, run the following commands: WIFISETUP WIFIBAND WIFIDIAG

Thanks We are using smpt2go to send email to a Gmail account this has stopped working in march.