开云体育

Hi, Just shoot us an email at help@... ( help@chowmainsoft,com ) and we will help you sort it out. There are a couple of firmware revisions so likely related to that. Cheers

You won't have the ability to change that for native devices like TSWs. The option will be grayed out in SIMPL and it will always assert the 127.0.0.1 entry to the processor. Only certain definitions

I figured that out and deleted my reply.

I think he's looking for the programmer that originally did the work.

sorry, looking for original coder original code is Foucault AADS 13mars 2017 ( JS) JsmImedia?

new owners - Adagio system, lots of Crestron CLX lighting

Have you tried to control them with Postman? I had some issue also, so I used postman to test with. Below is a link to my collection in postman, it has Up, Down & Status. To use it, copy the link,

P/S are internal - i assume all AES had same P/S i think i just need the P/S, but can't tell until i get 1 i might jury-rig 12V & 24V supplies just to check in any event i need to power it up to

Hello you all. I have a project with one L-85 tv lift and one CL65e pop up both from Nexus21. Both of them have the IP control box installed, and work normal with the included up/down controls. I

Mark Kaye, sorry dont have full story on this yet but we currently have a couple of full adagio pieces aaes and expander. If power supplies built in as such any help? Or what piece is this for?

no stock, i'm in Canada does anyone have a spare P/S or a source with stock? i have an RMA from Crestron, but returning it for repair is a PITA also i didn't program it & i'm afraid Crestron will lose

I have not done any QSX systems yet, just QS (which works well). I'm curious for future use: It is fair to say that Lutron has fundamentally changed their protocol or at least how certain *standard*

Argh.. yes it was .. ALT-TAB,, then alt space.. arrow keys.. thanks!

I worked with Jen E. from ControlConcepts on this and we bounced around a bunch of attempts.? Unfortunately, we weren't able to get a resolution from the modules themselves.? I don't exactly recall

Possibly off screen! Crestron sw does not handle multiple monitors well.

So after compile number of warnings and errors dialog box show up but not the dialog box with the text file to be saved.. is it possibly generated elsewhere?

We use this projector heavily.? I have had issues with hdbt but rs232 has been rock solid and we have had better success using a old sony vpl-fx51 module over sending the commands ourselves. we? use

Does anybody know if there is a solution for this? Back on another site and having the exact same issue. Had hoped this would have been sorted by now........

Have you tried On - \xA9\x17\x2E\x00\x00\x00\x3F\x9A Notes for the Device To ensure the functionality of the driver, please set the following: * Menu -> Connection/Power > ECO -> Standby Mode ->

Got this to work IP instead. Login with defaults U root P Projector Go to ADCP, turn it on w no authentication Leave port at 53595 / timeout 180 Add a host IP for control system. Then commands will be