开云体育

There are module examples in crestron application market for Epiphan. https://applicationmarket.crestron.com/epiphan/ You can use the base example for your project Nico NFH

Hi, is there anyone made som emodules for Epiphan units for Serial Control? I know there is published command online, but if anyone willing to share som prefab stuff im grateful. /Lars

BR 4007 = "CGo - Media Player - Browse Context Options Space/Padding Issues" BR 4007 was reportedly fixed in latest CGo v1.0.52

To set the baud rate to 9600 8N1 you need to first telnet into the just add power device and the type the following command astparam s s0_baudrate 9600-8n1 I think you can figure out how to set other

I may have a working Vio module pulled from an eholo we updated to 2n recently.... Friendly price, if you want it, dm me.

I appreciate your reply. I was doing a search on their website and couldn't find the info.? I was searching with "rs-232." When I searched with "rs232",? it gave me the info I needed.? You set the

I did a video wall with the Color Max MC-RX1/TX1 about a year ago.? I know the baud rate is adjustable.? If I remember correctly, you change the baud rate via a telnet command. The Color Max was a

It has been a while since I have worked with a JAP system, but I do recall that you do in fact simply use a TCP/IP client with the endpoints address and the port number for whichever operation mode

CP3 firmware issue?? You might try downgrading the firmware to a version from a few years ago and see if that make a difference.? I myself haven't seen this issue -- but for Series 3 devices, I use

Hello, Do you have an example for the Simple+ best regard

the json modules of crestron is great for working with files ,after you use it u dont put any more names in vtpro its in application market: https://applicationmarket.crestron.com/json-suite-v2-1/

Go with 2n.? I would steer clear of Holovision.? Just about every one we installed has failed.? I've also done AVLinkpro which is a Linux based SIP server and requires a lot more configuration /

I found this one on Google. https://www.fanvil.com/products/p5/wulianwangwangguan_1/20210921/5035.html#

Guys, Thanks for the recommendations. They both look like they will do the job nicely (at some cost though :) )

I know I have a few. They are at the office, so I won't know how many until tomorrow.

Hello, If anyone has blank CBD-P-W-T buttons (the small one, not the split buttons you can use in the bottom two positions).? ?I am looking for 40.? ?If you have some you would like to part with

TBH, we arent even messing around with Construct until there is a viable port over from our current package of interface options.? There needs to be a way to crossover for clients with older systems

One disadvantage Tony of the V1 vs V2 is that the engraving options for the V1 are more flexible. In the new "Impress" engraving program, they just have a few fixed options for how you can lay out the

?Thx From: <[email protected]> on behalf of "Dave H - Crestron TS via groups.io" <dhollander@...> Reply-To: <[email protected]> Date: Tuesday, July 25, 2023 at 1:09 PM To:

Nope, I would bet on some equipment is flooding the network and the cp3 gets affected. If this happens in your install “often”, try to sniff the network with wireshark or similar software to see